A4 EDC17C74 lost power in high rpm

[chli1976]

Made my first EDC17C74.
But have problem from 2900 rpm that the torque drop down. (yellow in the mod log)
The torque in log does not match to the file from 2500rpm upwards.
Had a performance hole 2900-3000 and from 3700-3900.

Maybe i missed a torque limiter, but tried serveral changes but don`t find the problem.

Can give me anyone a hint, please

[icezero2010]

Made my first EDC17C74.
But have problem from 2900 rpm that the torque drop down. (yellow in the mod log)
The torque in log does not match to the file from 2500rpm upwards.
Had a performance hole 2900-3000 and from 3700-3900.

Maybe i missed a torque limiter, but tried serveral changes but don`t find the problem.

Can give me anyone a hint, please

search this

AccMon_trqMaxEng_C

and check egt on !

[chli1976]

Thanks
I have logged EGT, with this injection qauntity no restriction
Must look for AccMon_trqMaxEng_C

Do you have a C74 Damos, if yes send me infos and price

[icezero2010]

Thanks
I have logged EGT, with this injection qauntity no restriction
Must look for AccMon_trqMaxEng_C

Do you have a C74 Damos, if yes send me infos and price

use c64 is ok to find all !

than take a look oil temp or intake temp

and when u check your log u see u get only 60 mg injection

[chli1976]

I know that i got only 60mg in this rpm`s but i don`t know why, will try your options.

In my log is log from ori and from mod, there are two tables.

Do you have a look in the mod table ?

[sdtsedat]

This one....


regards,

[icezero2010]

I know that i got only 60mg in this rpm`s but i don`t know why, will try your options.

In my log is log from ori and from mod, there are two tables.

Do you have a look in the mod table ?

you can change the value what i write or the axis from iq maps scale down both work

3c02aa i´m not sure but i think its correct adress

[chli1976]

3c02aa i´m not sure but i think its correct adress

Bought a damos now, but does not match in this area 100%
But 3c02aa is x-axis (rpm) in AccMon_tiShOffOvrRun_CUR

I think AccMon_trqMaxEng_C is on adress 3C02BA or 3C02BC

[ecuworks]

Made my first EDC17C74.
But have problem from 2900 rpm that the torque drop down. (yellow in the mod log)
The torque in log does not match to the file from 2500rpm upwards.
Had a performance hole 2900-3000 and from 3700-3900.

Maybe i missed a torque limiter, but tried serveral changes but don`t find the problem.

Can give me anyone a hint, please

pleas pm for password and thanks my