heeeelp Clk 320 w209 mileage display problem

[shaili]

hello friends

here I come back to you because I know that one of you can help me ....
I can not solve my problem I have to change the meter and I worked my mileage with Licznik on the Ezs and dashboard but now instead of the mileage I have posted some lines ------



Clk 320 w209 3.2 Petrol
year 2003

CLUSTER 24C16

[baze007]

hello friends

here I come back to you because I know that one of you can help me ....
I can not solve my problem I have to change the meter and I worked my mileage with Licznik on the Ezs and dashboard but now instead of the mileage I have posted some lines ------



Clk 320 w209 3.2 Petrol
year 2003

CLUSTER 24C16

your ezs file is not good......what inside 3K91D???

[brend]

your ezs file is not good......what inside 3K91D???

Ezs dump ok!
And inside 0K50E or 3K91D

[brend]

hello friends

here I come back to you because I know that one of you can help me ....
I can not solve my problem I have to change the meter and I worked my mileage with Licznik on the Ezs and dashboard but now instead of the mileage I have posted some lines ------



Clk 320 w209 3.2 Petrol
year 2003

CLUSTER 24C16

For autorization, cluster need set to 0km .
For autorization need StarXentry.

[baze007]

km its ok......but i thing on this file is missing some data........does not mean I'm right

[shaili]

EZS 9S12 3K91D

[brend]

km its ok......but i thing on this file is missing some data........does not mean I'm right

Pass ,ssid,vin,key ,hash
All location is ok.
Just nothing missing.......
With ezs dump all fine....!

[shaili]

OK but why when I cut the contact my mileage is displayed and when I put the contact at startup my mileage disappears and I have instead of the lines ------ ???

[shaili]

I do not have starxentry

[brend]

For autorization only xentry.....

What about original cluster.
Have you dump from original cluster?

[shaili]

For autorization only xentry.....

What about original cluster.
Have you dump from original cluster?

no I can not empty the original eeprom 24U17 is dead ... I try to put the cluster to 0km but I still have lines and when I cut the contact 0km is displayed ???

[bersch8688]

You Programm new Mileage 193080KM!?

Assyst and ECU dont forget ;-)

When you habe in Dash ------
Write into Dash 10.000km and put Dash back to Car.
Dash jump high in 2 second's to the Mileage from EZS

[ilian_cho]

try dhis dash dumpp

[shaili]

You Programm new Mileage 193080KM!?

Assyst and ECU dont forget ;-)

When you habe in Dash ------
Write into Dash 10.000km and put Dash back to Car.
Dash jump high in 2 second's to the Mileage from EZS

ok i will try this and give you a return thanks

[shaili]

but you want me to do what at ECU?