kessy continental porsche

**perfido** · 24th October, 2018, 05:48 PM

Hi all
I have a porsche with kessy continental, is it possible to get the pincode from the 93c86 dump?
the preload of pcf7936 is the same as tango or is there a difference?
I climb the kessy dump
It is the first time I work with this model, I greatly appreciate your help

**mustafabahar** · 24th October, 2018, 06:35 PM

With year its car ?

If its above 2005 you neet read ecu eeprom.
From dump generate dealer key and add it from obd.

Verzonden vanaf mijn iPhone met Tapatalk

**perfido** · 24th October, 2018, 06:48 PM

2009 is car

**mustafabahar** · 24th October, 2018, 06:53 PM

Read eeprom ECU with that file you can prepare dealer key after it with dump go in keylearning mode after resign all keys after check keys are good programmed.
Best regards

Moes

Remkeys

Verzonden vanaf mijn iPhone met Tapatalk

**leaserhu** · 24th October, 2018, 08:29 PM

See This!

Maybe help.

**p1et** · 24th October, 2018, 08:37 PM

I though only TMpro2 and VVDI Prog are able to decrypt eeprom from Kessy Continental by soldering wires to the back of the PCB board?

**perfido** · 25th October, 2018, 02:19 AM

it is dump of ecu bosch DI-motronic
95160

**pouleddy** · 25th October, 2018, 06:10 AM

Originally Posted by perfido

it is dump of ecu bosch DI-motronic
95160

Hi,
pin 01815
cs C4 3B E3 14 50 13 0E

**perfido** · 25th October, 2018, 09:15 PM

thanks
successful programming with lonsdor, but active immobilizer
what is there to do?

**p1et** · 25th October, 2018, 09:22 PM

How did you precode key? With what tool?

**perfido** · 25th October, 2018, 09:41 PM

Originally Posted by p1et

How did you precode key? With what tool?

cs C4 3B E3 14 50 13 0E

writting with im600

**perfido** · 26th October, 2018, 07:35 PM

Hello
today I have reviewed live data, because even this "active immobilizer"
and these are:
start procedure permitted: NO
DME answerd: YES
key for inmobilizer authorized: YES
Number of learnerd keys 2
key authentication okay: YES
inmobilizer blocking time after adjustment: 0 MIN
vehicle immobilizer: 4 ???'

What does that number 4 mean?
thanks for your help

**AjDaBeast** · 27th October, 2018, 04:52 AM

Hey, I did the same car not too long ago, Lonsdor doesnt do a good job programming the key in my case, try fvdi/avdi or vvdi2 if you have, for some reason even though lonsdor lets you do all the programming procedure it doesnt add the keys into the system properly in my case. Reprogram using another tool and it should work out. AJ da beast

**p1et** · 27th October, 2018, 12:00 PM

Originally Posted by AjDaBeast

Hey, I did the same car not too long ago, Lonsdor doesnt do a good job programming the key in my case, try fvdi/avdi or vvdi2 if you have, for some reason even though lonsdor lets you do all the programming procedure it doesnt add the keys into the system properly in my case. Reprogram using another tool and it should work out. AJ da beast

https://www.youtube.com/watch?v=FNtPn8_Mc0M

Apparently here Lonsdor programed key fine but look at mark 2:58 on video. It say 'If the remote can control the vehicle but cannot start the car, the dashboard indicates IMMOBILIZER ACTIVE' but it should be explained furthermore what to do then...