Ducati all-Sport 1200S

**dalisman** · 1st November, 2018, 06:56 PM

Hello All

I have some problem with changing km on cluster from ducati 2015 all road 1200.
original km was 43409 and i need to change for 30123.
unfortunately something is wrong because after writing orginal file in place of km i see stripes.
when i change to 0000000000 or FFFFFFFFFF in lines 010 and 020 in place of km show 0 so thats mean is correct .

can you change for me km in this file for 30123 ?

**Diagcar1** · 1st November, 2018, 07:49 PM

Here try this one,

**DCT748** · 1st November, 2018, 09:00 PM

please an info of how to calculate checksum FD ?...
(if bad checksum it shows 0 on the old ducati)

**dalisman** · 1st November, 2018, 10:12 PM

cluster show 0 (zero)

Originally Posted by Diagcar1

Here try this one,

**gepakg** · 2nd November, 2018, 01:55 AM

post photo of dashboard and eeprom location and here is your file sort to 30123km and most important chksum

regards Gepa

Originally Posted by dalisman

cluster show 0 (zero)

**dalisman** · 2nd November, 2018, 10:30 AM

Can you please send me password?

**Diagcar1** · 2nd November, 2018, 11:35 AM

And me also please the Pass...

**DCT748** · 2nd November, 2018, 12:32 PM

he's waiting for the pictures.
mister gepakg a clue please for the checkum

(I searched a lot without result...

)

**Dr. Zoidberg** · 2nd November, 2018, 02:37 PM

-----------

30123.rar

**dalisman** · 2nd November, 2018, 05:00 PM

Here it is picture of pcb and eeprom location

Originally Posted by gepakg

post photo of dashboard and eeprom location and here is your file sort to 30123km and most important chksum

regards Gepa

**dalisman** · 2nd November, 2018, 08:54 PM

its same ---- no value

Originally Posted by Dr. Zoidberg

-----------

30123.rar

**gepakg** · 2nd November, 2018, 10:46 PM

maybe i can tell the point off all but as i see to hard to push rep+thanx button for dump,then not see light to make another help

calculated by brain.exe & winhex 100% work

regards Gepa

Originally Posted by dalisman

its same ---- no value

**gepakg** · 4th November, 2018, 09:50 AM

this is not picture from bike it is powered up on table

regards Gepa

Originally Posted by dalisman

its same ---- no value

**dalisman** · 11th November, 2018, 03:31 PM

hello All

I still have same problem .what i reconize if checksum or value is incorect then cluster automaticaly set cluster to zero.
so probably your calculation is good.
Just i have question becasue maybe this bike have to verify milage with other unit like abs or engine ecu ?

Regards
dalisman

**gepakg** · 11th November, 2018, 08:21 PM

exactly this friend,i write it on previous post,when chksum wrong you will have - - - - - - ,if chksum ok real mileage or zero if it powered on table

regards Gepa

Originally Posted by dalisman

hello All

I still have same problem .what i reconize if checksum or value is incorect then cluster automaticaly set cluster to zero.
so probably your calculation is good.
Just i have question becasue maybe this bike have to verify milage with other unit like abs or engine ecu ?

Regards
dalisman