Guide for the newbies.
Heres how to load the patches.
- Download the relevant patch and extract.
- Download the relevant loader and extract.
- Connect your receiver to the pc via rs232c cable.
- Choose the correct com port.
- Leave the receiver on standby.
- Open the loader and select the software tab.
- Press browse and find the extracted patch.
- Press ok then start then wait.
This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.
USB, By Benny/9
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************
- Download the correct patch for your receiver.
- Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
- Insert your usb memory stick in the usb port under the front flap.
- Turn the receiver on ready to load the patch then press the usb button on your remote.
- on the next screen go to data transfer and click>OK.
now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************
Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.
Hope this is found helpful. Sadiq999uk and Benny/9
Last edited by .: JaCkPoT :.; 12th December, 2008 at 12:00 AM. Reason: USB added. thnx to benny/9
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
Thanks for help. The AU delay has fooled me before!
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
can i use a usb flash pen instead m8?
If you got usb receiver then ofcourse.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
the patch wont go on the pen
You have to extract the file first, the box cant unzip or extract. Try that.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
what is the difference between patching and softcam ?
there appears to be new for both almost daily, do they need patching daily ?
thanks
A patch is firmware/software to help your receiver work which has keys already in it but when they expire they need to be updated to thats what the softcam does.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
yes when i try to extract say something about cant do it
Keys au very regularly on some channels and on others after a period of time.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
I ve just joined this website. I have no experience of satelitte receiver . How can I download technomate loader for my 6900 Combo?
Dadadere57
go to the technomate download select ur box and download patch
Bookmarks