Noobs guide to patching your Technomate

**harlequin** · 10th January, 2009, 05:23 PM

Originally Posted by benny/9

************************************************** ******
hi m8,
do you have a null modem cable ?
i have read that all technomate usb models are best
patch for the first time with a cable.
i know this might seem a daft question you say you have the 6900 super
does it have a ethernet port and a usb on the back?
and which usb port are you useing?

Am using the usb on the front.
Will see if I have a null modem cable around, deffo one on my desk in work, but that is 40 mile away.
Yep USB and Ethernet on the back, Just eye balled it to make sure
Could try the usb on the back

Cheers

**harlequin** · 10th January, 2009, 05:25 PM

Originally Posted by Bulld0g

Make sure your loading the correct patch for your box.Double check the model number the patch is for m8

Cheers, think its right.....

**benny/9** · 10th January, 2009, 05:36 PM

Originally Posted by harlequin

Cheers, think its right.....

************************************************
i would give it a go with a null modem cable mate
i have the original 6900 with a usb on the front only
and i always used that for patching after a fist patch with
the null cable,but i now changed to a clarke-tech 5000 HDc plus
and this is the same spec as the tm 6900 super.

**harlequin** · 10th January, 2009, 09:07 PM

Originally Posted by benny/9

************************************************
i would give it a go with a null modem cable mate
i have the original 6900 with a usb on the front only
and i always used that for patching after a fist patch with
the null cable,but i now changed to a clarke-tech 5000 HDc plus
and this is the same spec as the tm 6900 super.

Cheers, Got 664p loaded from the null modem

**Tavveli** · 14th January, 2009, 07:03 PM

hi i'm new i want 2 patch TM 5200d but i dont know whre to go or how to find it could you help me please thank you...

**.: JaCkPoT :.** · 15th January, 2009, 12:15 AM

Use the other stickies

**willie g** · 16th January, 2009, 07:37 PM

Can anyone please tell me when the last patch for the Technomate 5400 was available ,the last one i had was at Christmass time ,only thing thats on ,on my box is Serius Sat
Do you have to load the softcam before a patch Cheers in advance Willie G

**.: JaCkPoT :.** · 16th January, 2009, 08:46 PM

Not sure but i think yesterday magic released some new patches..

**RDK_SAT1** · 26th January, 2009, 05:54 PM

hi guys someone pointed me here but where are the downloads for a technomate 5400ci+usb im a novice to this so hope i havent done anything wrong here by asking or posting

thanks

**benny/9** · 26th January, 2009, 07:08 PM

Originally Posted by willie g

Can anyone please tell me when the last patch for the Technomate 5400 was available ,the last one i had was at Christmass time ,only thing thats on ,on my box is Serius Sat
Do you have to load the softcam before a patch Cheers in advance Willie G

************************************************** ******
the latest patch is jan 18, but even with the patch
you have if you press menu on your remote and go to options in
the receiver menu and turn the A/U off exit the menu and save the setting
then load the softcam digi-tv will open

**benny/9** · 26th January, 2009, 07:11 PM

Originally Posted by RDK_SAT1

hi guys someone pointed me here but where are the downloads for a technomate 5400ci+usb im a novice to this so hope i havent done anything wrong here by asking or posting

thanks

************************************************** ******
look in this section at the top at the posts in red
and you will find the patches

**dave8555** · 29th January, 2009, 05:41 PM

How long do you have to wait for AU? I get to the stage where the patch has loaded and the 5400 has re-booted. Do you switch off and on after re-boot? (unclear in instructions). Also, when loading softcams etc, unit doesn't re-boot, is this ok?

**alunfennell** · 29th January, 2009, 08:56 PM

Some times It can happen that after the softcam loads it does not reboot, I normaly just use the previous Softcam and wait for the next new one to come along.

Regards:
Alun