Hi, I backup an image from one of my working dm500c and copy it to /tmp folder of my second box, run the command from telnet and it said 100% complete and disconnect. My box is now stuck in green with black screen. Nothing else, even reboots doesnt show anything on screen.
Please help as I am flashing the box for my fren!
Thanks a zillion!
Hi bros,
After i flash my dm800hd i got the error no CA found. So i trying to follow what here bros have advice but from the very first place i am unable to get my ip adress of my dreambox. I use serial to flash my dreambox so i don't know what is my dreambox ip. Now DreamUP unable to get dm800 and i connect the dm800 and laptop to router also. But nothing can be done.
So any bros can advice how to get my dm800 ip?
or
How i can flash my dm800 using 2nd stage?
Thanks in adv
hi bros,
i have flash to 'sim201e-ss76a-domica-50-dm800-20100629.nfi' after i got the no CA found. Now i can see the ip address but unable to telnet ip but able to ping ip. i got the serial and ethernet cable connect. box is in serial mode. i have try using DCC, start>run>telnet ip, winscp and flashfxp not one can connect ftp. i still unable to watch but able to scan channel. i think i never done b4 the 'keys' things so thinking of doing it.
Any bros can help me?
Last edited by weishun09; 18th July, 2010 at 03:59 AM.
thank alot !!!!!
great to join in this forum, very informative. thanks guys..
BTW I can't telnet or FTP the box any more. It is Dream BOX DM 500-S and I fu***d the box by doing a factory reset. and after ward renaming the file Gemini_0450_DM500_max_var_13092008.img.zip to backup.img. I hope I haven't killed it permanently. Please advice. Thanks.
can anyone tell me where to get a flash image for my db 500c plz .
Thank alot for your help.
Telnet guide very helpful, thank you
Its the best
And the Quickest Cheers ...............Paul
If your Happy with the Help push the Thanx button
PAUL
Great guide! Thanks!
I screwed up big time here. Went too quickly in my excitement to get the dm500c working I copied Devilfish instruction, actually thot i was do a backup !
But I did not copy the backup.img to the tmp folder. The commnad prompt showed the erase complete. I am afraid I am left w a paperweight :< unless someone can help.Code:cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
The box has green pilot on and that's about it. I see nothing on the tv and even when I run dreamup - the connect connect the dreambox.
Any inputs or suggestion to salvage my baby. Can i just copy the backup.img to the proper place?
thanks for your kind patience and understanding w a noobie like me. HELP HELP
ron
support mountain resue
support digital-kaos here
forum rules
no keygens or torrents to be posted no autodata discussions
pish pt walkers
Bookmarks