Toyota corolla 3ZZ-FE Keys

[AUS-MAN]

When cloning 4C or 4D i only ever use TPX1/TPX2. Any key head that uses a battery to clone is SHIT. I will never sell one to a customer.

[cjawahir]

Also not true,

chinese sell TPX1 and TPX2 too.

can you give me a link to the site that sell tpx1 and tpx 2 ?

cj

[cjawahir]

When cloning 4C or 4D i only ever use TPX1/TPX2. Any key head that uses a battery to clone is SHIT. I will never sell one to a customer.

i also use the tpx1 and 2 top copy key , but use the JMA tool , what do you use ?

cj

[AUS-MAN]

i also use the tpx1 and 2 top copy key , but use the JMA tool , what do you use ?

cj

Zedbull. IMHO it?s the best cloner. I purchase TPX1/2 chips from AUS suppliers. I don?t know where you?re from but I?m sure there are closer suppliers.

[ngakson2002]

hello
I am serge Ngako from Cameroon
Go to the link tmpro2.Com where you will have a hardware and a software Module 62 that will help you to clone the fixed texas 4C transponder in the TPX1 clonable chip.
It is what i am using and is working pretty well
Good luck

[devil09]

When cloning 4C or 4D i only ever use TPX1/TPX2. Any key head that uses a battery to clone is SHIT. I will never sell one to a customer.

you are right man with electronic cell in key head suppose in the running car cell gone weak or cell dead then car will stop running if car is on 100km or more then what will happen??? it will stop running suddenly just think electronic circuit with cell dont use it is BULL SHIT

[cammy25]

TMPRO is a good tool too ,AND can clone to TPX1 and TPX2.
Zedbull can do it too mate.

here is link to chinese supplier

JMA TPX2 Cloner Chip,


CJwahir,
I only say things when its A FACT. Else i will say "I think"
or "maybe"

[sogaro]

Hello! Toyota Corolla (from the 1st post) running well !
My problem was stupid - the amplifier of transponders (on the ign. swith) was wrong!!!
After changing it - every is all wright!
Thanks for a good knowledge.

What do you mean "the problem was stupid that , the amplifier of transponders (on the ign.switch) was wrong?" Was it wrong or bad? Wrong because you changed it when you lost all keys? or bad because it was bad after you lost all keys?

[cjawahir]

TMPRO is a good tool too ,AND can clone to TPX1 and TPX2.
Zedbull can do it too mate.

here is link to chinese supplier

JMA TPX2 Cloner Chip,


CJwahir,
I only say things when its A FACT. Else i will say "I think"
or "maybe"

thanks for that link , i have the JMA tool , so will give them a call .

cj

[AUS-MAN]

To save me signing up can you list there prices please?

[Kanaan]

Hi

what was electronically wrong with the amplifier of transponders .
did you check ?

[rashid01]

hi i have lost all my toyota camry 1998 model 6 selende amercan auto gear pls if any one have vergin file pls send me i want to start car
thanks

[sari shub]

thanksss

[KLS]

Hi all

i also have a 3zz-fe box and programmed the box i put in three keys but car doen't start i put in a 1zz-fe box the car is running again what can be wrong with the ecu box the car starts and then dies with the 3zz box

[DylanImmo]

Dear Dk, could anyone please help me add 4c key into eeprom , toyota corolla lost all key

Detail: Toyota Corolla
89661-02891 3ZZ-FE
immo dump ic900 L56(93c56)
corolla altis 3zz-fe ori immo.rarIMAG0648.jpg

4c immo key data:

Recognizing transponder...
||||||
Transponder recognized as Texas fixed
ID 4C - JMA TP02/TP07
TIRIS Data: 7E AC 5F CA 0A 00 00 00 00 9E 4F 7E

Thanks in advanced.