mercedes start error

[Shmortz]

Hi guys yesterday I did start error correction of the Sprinter, changes to files are just like those in posts 43 and 44, the engine starts without problems, but both remote controls on the keys do not work . Where could be the problem?
Here are my dumps to compare:

[Shmortz]

please help to find where in the imno dump are stored configurations and codes for remote controls or some info is this possible to program it with star diagnose and how can that be done...

[Shmortz]

anyone, please help with solution...

[mercis]

is your key ok?

[Shmortz]

yes, everything is ok, both remote controls working with original dump with start error but not with repaired one

[qife]

there is no immo off that can be injected directly into the ecu ,without need to move at immo box

[CarDiag84]

yes, everything is ok, both remote controls working with original dump with start error but not with repaired one

Your file repair.

[Shmortz]

my previous post are old but if I can have pass for the archive will be good, anyway the problem is not solved yet...

[Shmortz]

this solution not working, the problem is in immo, not in ECU, I have to repair immo dump then recode with star, the solution for self coding on MB CDI never worked for me.

[karanja]

HI SHMORTZ

try this dump and report



regards

[Shmortz]

I worked on that 10 months ago, anyway thanks for trying help me...

[Bazil_mb]

I have done the process of automatic control unit replacement (CDI) with das, virginising the ecu when prompted to fit new ecu, personalised and "start error" disappeared and the engine started, Happy days!!! but after approx 1 month the vehicle came back with "start error" i have repeated this process twice and the vehicle is back again, this is also happening with two other vehicles i have carried out this process on??

Any help much appreciated, i'm wondering if it is the fact i haven't virginised the wsp??

Hi,
Your problem with start error is self locking. After 30 wrong attempts for start ( wrong readed key code, ecu lock and start error its on). If U batt<10.8 V on crank key code is wrong readed by wsp( temic). Ceck your glow plug relay, glows, and battery

[dalisman]

hello all


I need some help I have problem with mercedes and start error

In ecu is 9p08 (sp08c3)
in immo unit is mot 68hc908az60
I read it like it is and also like az32

can some one change files to make it without immo ?

[mercis]

use this file,no need writte immo

[cedre]

Hello to all,
I have a vito 112 cdi unbootable
"Start error"
I wonder if it is possible to solve this problem without recode
the "temic"
I read eeprom 24c04 and would it be possible by changing it to repair
the "start error"
whether I am calling for a kind soul: Fatigue:
I'm really pissed off with this vito
I do not have diagnostic mercedes but I have a AutoCom: Bleu:
thank you

vito_eeprom_24c04.rar