RENAULT CAN CLIP REPAIR SOLUTION

[fane_81]

Maybe the problem is in power line which supplies incorrect voltage to AN2135SC?

Does your clone have one AN2135 and one AN2136 CYPRESS chips?

This is the problem

[baner]

This is the problem

Hey, mate, please be more specific and share with us!

Only pair of sentences, with little more description.

What component cause problem, how you did find and eliminate problem, maybe a detailed guide??

It will be more than useful for all of us who have problems with clone CLIPs!

Regards and respect!

[cavignac]

This is the problem

So AN2135SC CYPRESS source of the problem?

THE SOLUTION TO THE PROBLEM PLEASE, I'm blocked

[cavignac]

Maybe the problem is in epowr line which supplies incorrect voltage to AN2135SC?

Does your clone have one AN2135 and one AN2136 CYPRESS chips?

AN2135SC is changed but I have problem itself

how to test the power line, can you explain.

USB cable or 16 pin cable, with explanatory diagram

I ALWAYS LOVE DK, VERY VERY GOOD PARTICIPATE? THANKS TO ALL

[amir_82013]

hi
I need version 85 clip for download.
Please help

[fane_81]

Is not that problem i will write here when i solv this problem 100%

Hey, mate, please be more specific and share with us!

Only pair of sentences, with little more description.

What component cause problem, how you did find and eliminate problem, maybe a detailed guide??

It will be more than useful for all of us who have problems with clone CLIPs!

Regards and respect!

[baner]

Is not that problem i will write here when i solv this problem 100%

That will be great. As I said befere, put few words here as guidelines, what caused problem(s), and what you did to solve it. And if you can please take few pictures also. Its DK sharing!
Especially because some of great pages and threads about CLIP hardware problems and repairing are gone forever (deleted by accident from DK server).

Please keep us informed of your progress!

Regards and respect!

[bo0st]

so boys!
after 2months is my CAN clip repaired! was broken after starting with broken starter (voltage spike).
at first you must repair power line. next to repair power supply. and last step is flashing the tool with ver.55 CLIP software.

generally dont use chinese clone with low battery or broken starter/alternator.

files and photos coming soon!

[baner]

so boys!
after 2months is my CAN clip repaired! was broken after starting with broken starter (voltage spike).
at first you must repair power line. next to repair power supply. and last step is flashing the tool with ver.55 CLIP software.

generally dont use chinese clone with low battery or broken starter/alternator.

files and photos coming soon!

Please, share your expirience.
Like I said, a small repair guide with photos will be great contribution!

[bo0st]

files used to repair.

[dijo]

files used to repair.

Hi m8, thanks to share your experience!

But I can?t open your folder, witch kind of prog. i have to use?

When I start unzip, comes one error "corrupt"

Thanks!

[viorelcarl]

files used to repair.

Could you to upload again clip repair.zip

Thanks

[baner]

Hi m8, thanks to share your experience!

But I can?t open your folder, witch kind of prog. i have to use?

When I start unzip, comes one error "corrupt"

Thanks!

Thats strange, because I opened it without any problem.

Use Winrar, or Winzip, either is good.
If you could NOT open it, or opening give you errors, then your internet connection is bad!

Try to save/load it again!

[eddieddi]

I also cant open the with winrar or winzip...
Maybe please someone can repack and upload again.
THX
Eddi

[dijo]

I also cant open the with winrar or winzip...
Maybe please someone can repack and upload again.
THX
Eddi

Yes, please reupload it, for me it is not possible...

Winrar, Winzip, 7zip nothing works...