X-prog m & Golf V Micronas problem

**teerak2uk** · 22nd February, 2011, 12:44 AM

Originally Posted by exe123

yes because it was shipped without cable for micronas/freescale adapter

how did you make it pls any pics diagrams length etc

**Zmann** · 22nd February, 2011, 02:20 AM

This is my same adapter with cable but wiring out just for HC912 now. Some Micronas wire is not yet connected.

**rappttor** · 22nd February, 2011, 03:50 PM

Originally Posted by exe123

yes because it was shipped without cable for micronas/freescale adapter

can you post some pictures of your cable too?
any informations/specifications will be good
thx

**jokersat** · 22nd February, 2011, 05:43 PM

test fail

xprog m v 5 micronas is not good = 0

i use good cable for coax wire, keep coax wire away from power and of course lift the xtal from board in any case

and nothing , bloked on baypass securite

we spend time

im waiting New R250s

@+

**exe123** · 22nd February, 2011, 06:28 PM

then you have bad clone. if you buy good clone or original xprog m you will have no problem.

I have no pictures of my adapter but i used good coax cable around 15cm and a simple connector that fits on the 9s12/micronas pcb.

**rappttor** · 23rd February, 2011, 06:05 PM

@exe:
on micronas, your xprog passes the security on first try? or you have to make several atempts?

**exe123** · 23rd February, 2011, 06:39 PM

almost everytime on first try

**frikki** · 23rd February, 2011, 07:08 PM

what the reason for the coax wire, and where does it get connected to. thanks

**rappttor** · 23rd February, 2011, 07:09 PM

i thought only mine makes this kind of driblling

anyway, i teste it on a golf 5 dashbord, with cdc3272 on it, xprog read/writes oki, but the dashbord module doesnt know to read out pin and km from it; xprog has this type of micronas only on skoda and caddy, and the readings are mabojambo, different encrition or location, i dont realy know.

the good news is that he reads!

**baleyba** · 28th February, 2011, 05:34 PM

Hi all, Hi Exe

Thanks for this instructive thread.
I just would like to know if I can swap my golfv tacho with xprog-m ?

Simply by cloning Chassis number (VIN), serial number, login code and km fields from old to new cluster.

Thanks for your help.

regards,
Bal.

**exe123** · 28th February, 2011, 05:48 PM

no, you cannot. if you send eeprom + micronas content of both dashs I can clone it.

**jarfm** · 7th March, 2011, 03:29 PM

My XProgM v5.0 works fine with Octavia 2007. Connection like description, but power leads like in the picture below.
Read/write - OK
Read PIN, VIN, S/N - OK

Micronas CDC3297G secured

**frikki** · 7th March, 2011, 05:15 PM

hi jarfm. do you have picture of your adapter with wiring that you received or made up yourself. it will be appreciated if you can send a picture. i need to build one. thanks friend.

**jarfm** · 7th March, 2011, 10:03 PM

Originally Posted by frikki

hi jarfm. do you have picture of your adapter with wiring that you received or made up yourself. it will be appreciated if you can send a picture. i need to build one. thanks friend.

Hi, my adapter for secured MCU was included (XProg M v 5.0), only needs some modifications (described in errata..pdf). Tommorow i'll send some pictures.
Today i have tested on Passat 2008 CDC3217G, works FINE!