Renault Clip Firmware Upgrade Error

**Delboy65** · 15th February, 2010, 03:36 PM

Hi Guys

Anyone got the definitive solution for the Clip sensor upgrade problem.

I'm using Clip v94, when it detects the probe it automatically tries to upgrade the firmware failing at 20%.

My research here lead me to remove the RSRWIN registration artefacts but to no avail. I found a removal tool (CLIP_registration_remove_v3_d_k.zip ) on this site but it appears to be corrupt. Also noted somebody suggested installing Clip v85 or earlier, but can't find this version on the net.

The once and for all full solution would be nice.

Thanks

**BeianM** · 15th February, 2010, 04:57 PM

Originally Posted by Delboy65

Hi Guys

Anyone got the definitive solution for the Clip sensor upgrade problem.

I'm using Clip v94, when it detects the probe it automatically tries to upgrade the firmware failing at 20%.

My research here lead me to remove the RSRWIN registration artefacts but to no avail. I found a removal tool (CLIP_registration_remove_v3_d_k.zip ) on this site but it appears to be corrupt. Also noted somebody suggested installing Clip v85 or earlier, but can't find this version on the net.

The once and for all full solution would be nice.

Thanks

Did you get this from my link? I just downloaded it from your link above & it has just installed here with no problems. Download & try again.
v.92 http://www.digital-kaos.co.uk/forums...-v-92-a-46587/
Im sure v85 is on dk somewhere.
Do you have wireless connection on? if so turn it off.

**Delboy65** · 15th February, 2010, 06:33 PM

I tried the download again this time on a different computer, still winrar reports 'unexpected end of archive'.

So I dug a bit deeper with a hex editor to check the file headers. The file arrived to me as a zip file. I renamed it rar and it opened correctly. The file within was then given the zip extension and it uncompressed giving me an executable.!!

The exe is an installer package which runs but asks for an 'Installation Password'. Any ideas?

As far as wireless goes, the laptop is a stand alone machine and not connected to any network.

**BeianM** · 15th February, 2010, 10:56 PM

there is no password, just hit the enter key

**vevepatronu** · 15th February, 2010, 11:15 PM

try to downgrade your Interface with an older Renault Clip SW (versions that work on WIN 98)

**Delboy65** · 16th February, 2010, 04:44 PM

Thanks

Any links or ftp for older versions??

I have searched but the only torrent I found has no seeds.

As for the registration remove software, any password or no password allows the installer to complete but it dosn't write anything to the hard drive!!

**BeianM** · 16th February, 2010, 09:33 PM

Originally Posted by Delboy65

Thanks

Any links or ftp for older versions??

I have searched but the only torrent I found has no seeds.

As for the registration remove software, any password or no password allows the installer to complete but it dosn't write anything to the hard drive!!

Strange, it worked on mine!
List of older soft, see my post here http://www.digital-kaos.co.uk/forums...lip-v96-91580/

**Delboy65** · 19th February, 2010, 09:02 PM

I downloaded the v92 version and installed it.

Exactly the same problem with the need to update sensor firmware !!

Help please anyone!!

**DIAGNOSE64** · 20th February, 2010, 04:08 PM

Originally Posted by Delboy65

I downloaded the v92 version and installed it.

Exactly the same problem with the need to update sensor firmware !!

Help please anyone!!

I have all versions from V2 best is V53 I will upload it.

**frenchmad** · 22nd February, 2010, 12:48 PM

Have a look on the opening page. look under tools and then connections.Check to make sure it is set to disconnected. I had the same prob..Hpoe it works.

**Delboy65** · 14th March, 2010, 11:01 PM

Update

I have now installed V85 as per advice of some other forum members. This time the software detects the interface and goes straight to the vin screen.

After entering the vin I have full access to all ecu's except Air Bags.

I then tried with version 94 and the same problem raised its head with it looking to upgrade firmware.

Anyone experience a need to upgrade after v85?

It appears the device requires a firmware upgrade sometime after version 85.

**vrscoventry** · 30th March, 2010, 01:39 PM

hi ive just installed clip and have thr spx registration page , will the above software fix that ?

**BeianM** · 30th March, 2010, 10:59 PM

Originally Posted by vrscoventry

hi ive just installed clip and have thr spx registration page , will the above software fix that ?

No. you need to run a crack or manually edit the reg. Have a search & you will find it.

**magic_clip** · 21st April, 2010, 12:30 PM

hi, anyone say why somtimes clip launch firmware upgrade at startup of clip? mine stop at 20% and error msg. somtimes firmware upgrading until 96% on probe and fails.

Clip v88

Maybe V92 Solve problem?
thanks, Mikael