Fiat IAW 59F.M3 -*Need pin login from dump*-

[paul_12345]

Hi

1) the Pin code is writen inside the BSI you need to read the dump from BSI and post .

2) now check your ecu number and the "HW" value . if the HW > 100 Then you can make the ecu vergin and if not you cant make it version .

3) if the HW is greater than 100 then you need to wake up the ecu in boot mode then you can read and write using galleto to it .

4) if you shere your problem with the original ecu maybe we can help you fixing it .

Good luck
Kanaan

I broke the other ecu and its now in the bin.

I dont need to virginize the ecu as it the correct one for the body computer, I just wanted the pin so I could program keys for it.

[paul_12345]

Here its got read the chip in the engine ecu for the 59f m3, can I also read the body computer for the pin as this would be a lot better

ICC Help

[filoxio]

you have the program to decdript IAW 59F?

[Kanaan]

I broke the other ecu and its now in the bin.

I dont need to virginize the ecu as it the correct one for the body computer, I just wanted the pin so I could program keys for it.

the pin code is inside the body module (BSI) and not inside the ecu .
read the dump from the bsi and post .

[ryanlee9432]

Same problem here... any help?

[Kanaan]

Same problem here... any help?

whats the same problem please explain ...

[pfeff-cool]

Hi,

i read out my IAW 59F M3 HW303 1808-omz ECU with my Galletto 1250 in boot mode, filsize is 320 kb.
In normal mode is the filesize 256 kb and i can wride in this file in my ecu.
I cant write my bootmodefile (320 kb) back into ecu with my soft eobd2, he say "wrong port speed".
what can i do to write this file into my ecu?

can anyware kill my immo? her is my bootmodefile...

[paul_12345]

Hi,

i read out my IAW 59F M3 HW303 1808-omz ECU with my Galletto 1250 in boot mode, filsize is 320 kb.
In normal mode is the filesize 256 kb and i can wride in this file in my ecu.
I cant write my bootmodefile (320 kb) back into ecu with my soft eobd2, he say "wrong port speed".
what can i do to write this file into my ecu?

can anyware kill my im*o? her is my bootmodefile...

you cant' kill the im*o through Galletto dump

You need to read the eprom inside the ecu direct, then you can viginize the ecu from this dump.

[paul_12345]

--- done it ----

[paul_12345]

..........................

[paul_12345]

- bump -

[luiggii79]

please help me for read the virgin mode ? this ecu