you could swap the eeprom from old cluster to replacement one,should be a 93c56.
Hi,
the problem is this, I had to change my dashboard. I bout it from car parts seller, and now the km is different from original one. Is there a way to program it directly from 4pin plug on the bag of dashboard or from big one (main connection) and what is the program for this?
you could swap the eeprom from old cluster to replacement one,should be a 93c56.
The old one is dad and the memory too.
It is possible with Tachouniversal...
But I always, desolder both displays and read eeprom directly with clip.
there was about it look here
link
cheers m8
You must find it MM.exe(Motometer.exe)MS-DOS soft for this dash.Connections with lpt port to dash.For me, MM.exe soft work fine with this sw version of GIII.
swap the 93 eproms..unles you have some eprom programer ? If so read the chip 93 and post it here we can calculate new mileage..or if you have some old Pc/win98 search for simple cable from lpt to 4 pin on backside..there is no electronic simple cable,work perfect in dos..
easyiest way for you probably is swapeproms so try it
Hey Glove. Try attached mm.exe on your dash. You have to do your own cable. All info attached, the only thing its in german. Also a simple 93cxx eeprom programer is PSEEP.exe. Google it if you need it. Also you have to use a old computer with this if you want it to work. I used a Chicony Laptop model: nb9800d, very old laptop, I think it has a 33MHz processor...LOL.
Thanks
Hello, i cannot download this VDO MM zip.
Bookmarks