Upload p-flash/d-flash and eeprom read.
Also,did you select correct partition?
use these files
https://www.digital-kaos.co.uk/forum...1-r56-high-eks
I try to recover a frm3 i read whit xprog 5.55 dflash but when i try to convert to eprom i recive some mising information i try to read few time but same error can anybody advise what to do plsss.
Conversion complete.
Logfile:
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
ERROR:root:Unknown CMD type detected: 0x00
WARNING:root:No last block found!
INFO:root:
Corrupt D-Flash file detected! Results probably incorrect! (Don't use clone programmers)
What could be the reason for this error?
Can you share a dump so that I can record it in EEE? The VIN code needs to be changed in the .bin ? or is it possible to encode the VIN through NSC Expert ?
Need dump:
FRM3 MINI COOPER R55N 2010
Production date: 03.05.2010
HW-NR: 3455163 (Hardware part number)
SW-NR: ffffffffffff (Updated part number)
ZB-NR: ffffffffffff (Original part number)
S: 3456051 (Original part number)
SW: 116030 / HW: 04
Thx
e621dd4e-d925-4d85-b6ae-a6eae45ffc32.jpg
Last edited by TIGHTFIN; 28th November, 2022 at 08:11 PM.
Upload p-flash/d-flash and eeprom read.
Also,did you select correct partition?
use these files
https://www.digital-kaos.co.uk/forum...1-r56-high-eks
Last edited by Stelaras26; 30th November, 2022 at 10:32 AM.
If i Helped you,use thanks and rep button to thank me back
fuzz1 (16th December, 2022)
Hi,
can somebody help me out here?
For my point of view, data is ok.
But in car nothing works as it should. I also cannot code it, since ncs does not recognize it as FRM3. It just says FRM2.
Bookmarks