Fantomel can you share link to yor MY VCDS COLLECTION on server MEGA ?
Not yet. Mine is dead. Plugged or unplugged into the car. Doesn't matter. What version of SW do you use? Have you ever flashed it? Do you need loader or some trick? Did you have to remove any protection from PCB?
This is mine:
IMG_20171012_210340.jpgIMG_20171012_210353.jpg
Last edited by cloudless; 12th October, 2017 at 08:56 PM. Reason: Photos added
Fantomel can you share link to yor MY VCDS COLLECTION on server MEGA ?
Mine is different ,has 2 MCP chips on it, I flash it with pony prog and the old fashion programmer. I use 17.8 and the loader from Kolimer.
hI GUYS
Whitch sofware should i use for china 409.1 kkl cable
i used a cracked vcds but alwas gone registered after the crack ,somebody told me it should be a specific 409.1 vcds is this true ? and where i can i found the craked software ?
Is a cheap usb 409.1 kkl cable
Best Regards
JOSÉ
will work with vcds lite
just ordered this hex v2 clone : olx_image_2017-10-15_15-56-04.jpg
in 2 days i will get it and post some photos of pcb. hope it works. the guy who sell it send me some photos.olx_image_2017-10-15_16-16-58.jpg
Last edited by mircea13; 15th October, 2017 at 08:07 PM.
and another oneolx_image_2017-10-15_16-16-13.jpg
Type: RT HEX+USB+CAN
did anyone have some experince with this clone ? is it stable ? seen some videos on youtube about it and there are some ppl that are having comunnication errors with this one. like all the lights in dash are flickering ,abs goes on and off same as tps engine etc.
That is bad clone. Is not HEX V2.
Do not work in full and cannot be updated.
you say it's bad bassed on what ? you had one to work with ?
Personal experience.
ok. sorry to hear that . maybe i'm lucky will see.thx!
Guys, how do you distinguish these interfaces by just looking at the picture? Even in the picture the interface is in some kind of anti-static bag...
Honestly, to me it looks like Genuine RT iface. It has got all the logos, the screws are like on genuine, the USB wire is good quality, etc...
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
Bookmarks