Hello vstrglv,
VAG-COM 607.3 is O.K.,Your HEX is O.K.Your T5 haven't CAN bus,01-Engine working using KWP-2089 protocol.
with respect,
igorm
Hi, igorm, according to ELSA there is CAN bus and there is a two can bus pins in diagnostic connector. There is a note at can bus diagnostic connector pins - "Engine starts ". It means that an engine must operates for can diagnostic. But in my case there is no can diagnostic even an engine starts.
Regards,
One guy from http://www.vw-bus.ru/forum/ said that he had can diagnostic for T5, but in COM port, not USB.
Hello vstrglv,
In any case You haven't CAN bus.You don't need turn engine on to activate CAN,You just need to turn ignition ON.But in Your situation don't spend Your time about CAN bus,Your T5 can use KWP-2089 protocol and this is it...
with respect,
igorm
Hello DORCKY,
PLEASE CONTACT ME VIA PRIVATE E-MAIL.I HAVE SOMETHING WHAT CAN BE VERY VERY INTERESTED FOR YOU !
with respect,
igorm
Hello Xoom,
I wish to have good news but for now NOTHING.I have something but friend tell me this is not O.K.,for now
with respect,
igorm
PCB with Si9243..
- Tested...
- Working...
deteli (23rd September, 2018), droid0101 (13th March, 2023), Fresk29 (17th February, 2018), haveje57 (27th January, 2022), KennySmit (3rd May, 2016), laki23 (10th March, 2023), ProblemChild (2nd May, 2021), Rebello Brian (12th August, 2020), semga (9th August, 2016), zZarZiLLoSs (25th May, 2020)
...here is difference between 9241 and 9243...
KennySmit (3rd May, 2016)
Hello,
Have anybody news about VCDS 10.6 ?
Thanks
hey guys, are all links down?
where did the VAG threads all go?!
Bookmarks