VAG-COM/VCDS EVERYTHING

[kaalis]

China - aliexpress .

Contact seller, describe how bad it looks, how it works, show pictures, get refund. Order another cable elsewhere. End of story.

[tucano79]

Hi guys when I try to program with usbasp my cable I have a message that show "chip enable program error". May be because first time I try to erase chip and then to write atmega by usbasp but I missed to give 12V. So now if I try to program correctly with 12V I have this message and I can do nothing. Can you help me what I have to do to repair cable?

[Resko]

seems to be ok
run now VAGCOM_EEWriteLang as admin choosing your language and with AV and/or Windows Defender off
after all ok, run vcds from VCDSLoader that you previously placed in vcds instalation folder

Hello Belkor

This did the trick, it is now working! Thanks all for the support. Now on to another problem, which doesnt belong to this thread i guess- Eeprom in the park assist ecu is corrupt..
I found a working flash dump so now i need to figure out how to flash it..

[Roma77]

Почему у вас есть 35-36,

[belkor]

Hello Belkor

This did the trick, it is now working! Thanks all for the support. Now on to another problem, which doesnt belong to this thread i guess- Eeprom in the park assist ecu is corrupt..
I found a working flash dump so now i need to figure out how to flash it..

well, glad to hear that
need Carprog or Xprog or something like that
if not, another park assist ecu
also could try odis engineering

[Roma77]

Hi guys when I try to program with usbasp my cable I have a message that show "chip enable program error". May be because first time I try to erase chip and then to write atmega by usbasp but I missed to give 12V. So now if I try to program correctly with 12V I have this message and I can do nothing. Can you help me what I have to do to repair cable?

Why do you have 35-36 soldered to each other on the processor?

[bratek]

Hello all
I'm new to this forum, I have read a lot of posts including in the thread and I probably still need help.
hardware as in the pictures

IMG_20180823_092706.jpgIMG_20180823_092724.jpg

atmega 162 16AU
ATF16V8BQL
STC11F01
FT232BL
MCP2515
MCP255
I am asking for info on how to upgrade to newer versions, I have a usb programmer.


Thanks in advance for your help.

[belkor]

Hello all
I am asking for info on how to upgrade to newer versions, I have a usb programmer.
Thanks in advance for your help.

first download from here kolimer v6.3 https://www.sendspace.com/file/em3y1f
AV or Windows Defender off
plug in your cable into OBD socket car
run VAGCOM_HWType as admin and report

[kaalis]

He has STC chip. Need to sort that out before. Read info.pdf from archive but he have to do it anyway.

[networkers]

Hi guys when I try to program with usbasp my cable I have a message that show "chip enable program error"

Error could be wrong connections, so check your wiring. Maybe give "avrdude" a try. Batch/CMD files are in loader archive.

[adicristi]

fatal error.PNG
So, why I receive this error and how can I fix it?

[networkers]

So, why I receive this error and how can I fix it?

Educated guess: USB cable malfunction or FTDI chip (almost) dead

edit: after reviewing your pictures, i agree 100% with kaalis

[adicristi]

I will order I FTDI Chip.


Sent from my Mi A1 using Tapatalk

[alexm1]

Hello all
I'm new to this forum, I have read a lot of posts including in the thread and I probably still need help.
hardware as in the pictures

IMG_20180823_092706.jpgIMG_20180823_092724.jpg

atmega 162 16AU
ATF16V8BQL
STC11F01
FT232BL
MCP2515
MCP255
I am asking for info on how to upgrade to newer versions, I have a usb programmer.


Thanks in advance for your help.

Use multimeter to find pads(near to usb 4 wires) coresponding to Atmega 1.2.3.4.

For this interface you do not need to worry about STC. Just read with usb programmer just to check if you find the rigth pads and than write x46 dumps using the corect bits as are described in info.pdf.

Use mprog to write eeprom to ftdi.

[Tib82]

Hi guys when I try to program with usbasp my cable I have a message that show "chip enable program error". May be because first time I try to erase chip and then to write atmega by usbasp but I missed to give 12V. So now if I try to program correctly with 12V I have this message and I can do nothing. Can you help me what I have to do to repair cable?

You don't need to add 12V when you flashing with USPASP / USBISP. It needs only 5V through USB port.

I got the same "chip enable program error" when I try to use this cheap ($1.25) programmer under Windows 10 (64-bit):
usbasp.jpg
For this the solution for me was a good driver: USBasp Driver (libusbK v3.0.7.0)
With this the Windows device manager recognized the programmer. Works proper with ProgISP 1.72

Previously I tied an another programmer and I can offer this one ($2.30), what was recognised automatically by the Windows. No extra driver needed.
Windows device manager recognized the programmer. Works proper with ProgISP 1.72 and it recognised the programmer as "ZF-008 HV Programmer Ver: 1.6"
usbisp.jpg