VAG-COM/VCDS EVERYTHING

[liviudiaconu]

Your problem might be the FTDI -RQ on your PCB, as I read on earlyer pages, kolimer's dump are for FTDI RL type.

The same thing, as kolimer already said.

Hi. I write 17.1.3 kolimer 0x46 https://goo.gl/photos/7S6NMTUNLojr9YRp9 My pcb https://goo.gl/photos/HogpGRSVaqYkhDoZA and I'm have problems with this https://goo.gl/photos/AoTpjgJCa6JCJwRy8 I'm don't see fault codes, dynamic logs works excellent in kline and CAN cars.

Are you sure you have DTC on engine? Or is only a generic example and for all controllers display the same message? Btw, your HW is a very good HW, one of the goodest HW i saw. Almost a exactly clone of OEM cable. The 7805 is maximum warm, never hot.

[kolimer]

Not FT232RQ and FT232RL. My VCDS FT232BM. Search only BL, BM

So no "Search EPT file FT232BL for version 17.1.3" as answer to previous post, but "I'm searching EPT file FT232BL for version 17.1.3" as request !

[skroman]

Hi please dumps for vcds 17.x.x ?

[alexm1]

Hi,
please read a little more ( previous pages) .

[skroman]

http://www.digital-kaos.co.uk/forums...2&d=1491602266

which software works ??

[kolimer]

http://www.digital-kaos.co.uk/forums...2&d=1491602266

which software works ??

Search more.

[EpicFail78]

hi Guys.
I have buyed this china clone.
Vagcom 17.1 full active vcds 17.1 China crack VAG 17.1 For VW Audi Seat Skoda ,V17.1 VAG Diagnose Cable support all systems diagnostics including K1,K2,CAN,UDS. full active vcds 17.1 with ATMEGA162 + FT232RL + L9637D + 16V8B.
http://www.obd2cartool.com/vagcom-17...t-skoda-p-1341

Can i update it to kolimer crack ?
The hardware detection tool say no interface found!

hi guys
can i flash it =?Neue Bitmap (2).jpgNeue Bitmap (3).jpgNeue Bitmap.jpg

[skroman]

I want to publish new cracked VCDS version 17.1.3. Inside the archive there is HWType detect tool, ATMega dump (FW+BootLoader for HW type 0x44 & 0x46 + EEPROM), FTDI EPT and XML file, original installer and cracked exe. Cracked exe disables internet connection to ROSS, marriage with FTDI Chip ID and clears blacklisted serials.

Tested on my car and it is working.

The archive can be downloaded from http://www.mediafire.com/file/tl25s9...CDS_17.1.3.zip

Please link not work

[alexm1]

@EpicFail78
Chose dump for hwx46 from kolimer rar(zip).

Can you share vagcom_hwtype detection tool?

[skroman]

HWType detect tool, ATMega dump (FW+BootLoader for HW type 0x44 & 0x46 + EEPROM), FTDI EPT and XML file, original installer and cracked exe




please link

[gumacz100]

"Are you sure you have DTC on engine? Or is only a generic example and for all controllers display the same message? Btw, your HW is a very good HW, one of the goodest HW i saw. Almost a exactly clone of OEM cable. The 7805 is maximum warm, never hot."

This is clone cable vcds 16.8.3. All controllers have problem with this.

[alexm1]

HWType detect tool, ATMega dump (FW+BootLoader for HW type 0x44 & 0x46 + EEPROM), FTDI EPT and XML file, original installer and cracked exe




please link

thys is the link shared by kolimer
try if it still works

https://mega.nz/#!oyowxRDY!1vVTUiAJD...ABkmS-Qtlrjupo

[skroman]

Thank you already i have

[alexm1]

I found hw type detection tool, was in kolimer .rar - my mistake.
About using this tool: I just have to conect usb(vcds) to PC and hit READ?
I tried that for 2 cables and : Interface not found!

Trimis de pe al meu SM-N9005 folosind Tapatalk

[EpicFail78]

@alexm1 you need 12v plug in your car or use USBASP+ plugin the interface on laptop!

@ free download HWType detect tool, ATMega dump (FW+BootLoader for HW type 0x44 & 0x46 + EEPROM), FTDI EPT and XML file, original installer and cracked exe http://www99.zippyshare.com/v/n4D48ct1/file.html