Donate me the case and the cable.
The internals can be safely disposed to trash bin.
Last edited by pkor; 21st February, 2018 at 03:31 PM. Reason: more information
Donate me the case and the cable.
The internals can be safely disposed to trash bin.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
:-) not very helpful
You/we can fix/update cable with Atmega inside only!
No Atmega162 inside- no change to make it work with files shared on this thread.
Usually no. First time you need the header and programmer.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
BASi77 (22nd February, 2018)
please remove the picture with the serial number!
I bet there's a whitelist.
Otherwise there would be no purpose at all to use those Unique IDs unless it accepts any new.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
Any 12V DC Power supply will work.. just connect:
OBD2 PIN 16 to +12V
OBD2 PIN 4 to GND (minus)
Do I have to use 12V from the Pc Im using, or can I use another 12v dc power, because I cant get it working..?
and I get no Light in my vag 11.11 cabel.?
Progisp says "programmer not found"
do I need a USBASP programmer..?
Last edited by Dynamicdk; 22nd February, 2018 at 06:04 PM.
Bookmarks