VAG-COM/VCDS EVERYTHING

**xoom** · 25th February, 2018, 06:41 PM

Originally Posted by Dynamicdk

VCDS.exe first time, and then VCDSLoader.exe

Looks like you NOT READ pdf at all..

**kaalis** · 27th February, 2018, 01:25 AM

Could someone verify succesful connection to any ECU that is wired to K2 line (pin #15) using clean vcds software + loader and post details here or PM?

Thank you.

Not working with actual 16.8 or 17.x hardware.
Only way i found it work was old 12.12 upgraded.

**flavyus1987** · 27th February, 2018, 11:01 AM

I can tell you this, dealer use an adaptor for old audi for what we named K2 or L line, pin15.
L line is a second k line, but i think more slowly.this protocol will be lost in near future.

**kaalis** · 27th February, 2018, 12:09 PM

You are partially wrong. K2 is still used in some extras in Audi A4 B5-B7, A6 C5 and others VW etc. And they all don't need 2x2 adapter to 16pin cable.

http://www.ross-tech.com/vag-com/car...ions/a4s4.html
http://www.ross-tech.com/vag-com/car...ons/100a6.html

Plus old 100 C4, A6 C4, 80 B4 with 2x2 connectors in the car itself.

**Stompie** · 2nd March, 2018, 10:51 AM

Hi all, need some help please.

I have vag 113 / 11.11.3 cable but doesnt connect any longer.

Cable is atmega162

Showing as rosstech hex cable in windows but has exclamation mark?

Please point me in the right direction to what i need to fix my cable

Also- can this cable be modified to use on BMW Inpa diagnostics?

Sent from my HUAWEI VNS-L31 using Tapatalk

**alexm1** · 2nd March, 2018, 01:47 PM

Hi,
anyone can help with Interface programming pinout ? For connecting to Uspasp prog.
Mosi, MISO. SCK RESET.

Pic below.

Thanks

L.E. - this is hex V2.

**xoom** · 2nd March, 2018, 02:18 PM

Originally Posted by alexm1

Hi,
anyone can help with Interface programming pinout ? For connecting to Uspasp prog.
Mosi, MISO. SCK RESET.

Pic below.

Thanks

L.E. - this is hex V2.

Do a "Beep" test on multimeter to find SPI pins..
ATMega162 pins:
1: MOSI
2: MISO
3: SCK
4: RESET

**electrohicham** · 2nd March, 2018, 02:28 PM

Originally Posted by kolimer

New loader for 18.1.0 V6.1
Special thanks to my friends for testing.

Original installer:
http://dltemp.ross-tech.com/VCDS/dow...-Installer.exe
SHA256 cba53d02a51014b3937938b7bc44edda9ec9354d135c178155 512dae9d021b9e

Loader:
http://ge.tt/7zLlAZo2
https://www.sendspace.com/file/1k82p4

Enjoy ...

hi,
can reupload installer please ?
thank you.

**hid3** · 2nd March, 2018, 03:23 PM

Originally Posted by alexm1

Hi,
anyone can help with Interface programming pinout ? For connecting to Uspasp prog.
Mosi, MISO. SCK RESET.

Pic below.

Thanks

L.E. - this is hex V2.

Hi,

it would be nice if you could share the pinout when you figure it out.
The very same interface should reach me in a few days so having the pinout on hands would save me a few minutes of life.

Thanks.

**openit** · 2nd March, 2018, 05:41 PM

when rosstech moved to 18.2.0 for sure removed the 18.1.0 from the server......link is from rosstechserver

**alinutz198** · 2nd March, 2018, 06:43 PM

hello again.
after a succesfuly upgrade by usbasp programer, cable is seen by windows but i cant do the test .
i try test on bench with 12v from a 1A power suply.
test.jpg

the interface is 0x46 that was originaly with 9.xx software.
led is starting red and after turn green, but no test was made.
i have stc chip but i cut pin 9 to r50 link.

**alexm1** · 2nd March, 2018, 07:17 PM

Originally Posted by xoom

Do a "Beep" test on multimeter to find SPI pins..
ATMega162 pins:
1: MOSI
2: MISO
3: SCK
4: RESET

Using a multimeter, was my first choice...but battery run out of juice and no "beep" from the them....so I had to go out to buy new one, anyway I did reflash by usb...I ussualy do the "classic style"...usbasp

Originally Posted by hid3

Hi,

it would be nice if you could share the pinout when you figure it out.
The very same interface should reach me in a few days so having the pinout on hands would save me a few minutes of life.

Thanks.

I managed to find pinout for hex.v2. see pic below.

**alinutz198** · 2nd March, 2018, 07:50 PM

Originally Posted by alinutz198

hello again.
after a succesfuly upgrade by usbasp programer, cable is seen by windows but i cant do the test .
i try test on bench with 12v from a 1A power suply.
test.jpg

the interface is 0x46 that was originaly with 9.xx software.
led is starting red and after turn green, but no test was made.
i have stc chip but i cut pin 9 to r50 link.

i test with vag com hwtype.exe , din't detect any hardware

**alexm1** · 2nd March, 2018, 08:01 PM

Try to reflash again with usbasp and choose right dump (0x44/0x46) see indication in pdf released by Kolimer in v6.1 zip to see what type is your cable.
Pay attention to fuse lock bit...if they werent set properly before.

**hid3** · 2nd March, 2018, 08:32 PM

Originally Posted by alexm1

Using a multimeter, was my first choice...but battery run out of juice and no "beep" from the them....so I had to go out to buy new one, anyway I did reflash by usb...I ussualy do the "classic style"...usbaspI managed to find pinout for hex.v2. see pic below.

Hi Alex,

thanks for sharing, this might be useful for other people here too.

Also, did I understand correctly that you reflashed via USB? Was this cable from Odb2CarTool with their software/dumps inside? Did it have bootloader? I know these dumps are Kolimer's too, but if I remember correctly they didn't have the bootloader...