VAG-COM/VCDS EVERYTHING

**Mario6** · 27th July, 2018, 02:55 PM

HotSwap

Page 424 post 6346

VCDS 18.1 ENG

VCDS 18.2 ENG

Release 18.2.1
http://dltemp.ross-tech.com/VCDS/dow...-Installer.exe

Beta 18.5.0
htt

**HotSwap** · 27th July, 2018, 10:39 PM

Originally Posted by Mario6

HotSwap

Page 424 post 6346

VCDS 18.1 ENG

VCDS 18.2 ENG

Release 18.2.1
http://dltemp.ross-tech.com/VCDS/dow...-Installer.exe

Beta 18.5.0
htt

Thanks

**zapdus** · 28th July, 2018, 03:15 AM

Originally Posted by HotSwap

Sure, but 18.2.0 is not available to download anymore. Any suggestions?

Hey, I used fantomel links all ok

EDIT: sorry didnt see your posts @Mario6

**rak183** · 29th July, 2018, 05:59 AM

Good morning,
I got an updatble clone from bulgaria. It has atmega chip like interface from obd2cartool. I wont to read atmega from bg clone an write it to obd2cartool interface. How i can do this? Thanks for any answer.

**alexm1** · 29th July, 2018, 06:47 AM

If you are asking this...you ca not read; actually you can read atmega but what you get it is encrypted dump and will not work to be writen on another cable, unless the cable you have has an unprotected Atmega.

**rak183** · 29th July, 2018, 07:04 AM

How i can check it atmega encrypted? I have usb asp.

**alexm1** · 29th July, 2018, 07:09 AM

Read and than write what you get to another cable, if it works .....your are lucky
Use usbasp to read

**rak183** · 29th July, 2018, 07:11 AM

Ok. I will try it an Report.

**rak183** · 29th July, 2018, 12:03 PM

Chip is locked. I cant change back the product id to f24. I used mprog with ept flash in colimer but it still 6001. Any idea?20180729_124209.jpg

**alexm1** · 29th July, 2018, 12:28 PM

Now You talk about FTDI?
If so check if it is detected in Dev. Manager and try other vers of Mprog

**rak183** · 29th July, 2018, 01:15 PM

Originally Posted by alexm1

Now You talk about FTDI?
If so check if it is detected in Dev. Manager and try other vers of Mprog

Yes i mean ftdi. Ok i try and report.

**rak183** · 29th July, 2018, 04:05 PM

Originally Posted by rak183

Yes i mean ftdi. Ok i try and report.

I used the new mprog. I wrongly flashed 0f24. Know the interface is not more detected with mprog. Is there any oder possibility to change the product id? 20180729_154322.jpg

**xoom** · 29th July, 2018, 04:36 PM

Originally Posted by rak183

I used the new mprog. I wrongly flashed 0f24. Know the interface is not more detected with mprog. Is there any oder possibility to change the product id? 20180729_154322.jpg

Use UDFixer.. it was made somewhere here

or manualy change drivers VID/PID

**liviudiaconu** · 29th July, 2018, 05:28 PM

Originally Posted by rak183

I used the new mprog. I wrongly flashed 0f24. Know the interface is not more detected with mprog. Is there any oder possibility to change the product id?

Let me understand: YOU wrote bulgarian cable FTDI with another .ept file?
If YES..in this case.."bye-bye" "bulgarian updatable".

**alexm1** · 29th July, 2018, 06:10 PM

I think (=I hope) is doing experiments on the other cable, that one about he asked for help to make it worked... not the working cable.
Anyway he asked about how to read atmega and he managed to "kill" the RL cip...