VAG-COM/VCDS EVERYTHING

[DKa0S]

16.8.3 cable after reflash works greate RT v18.9.0 Thank you!

[drewdom]

Hi friends.Can someone help me to identify this components:

[Roma77]

Hi friends.Can someone help me to identify this components:

SS8050, (J3Y), Bipolar Transistor, NPN 25V 0.5A, SOT-23

[xoom]

Hi friends.Can someone help me to identify this components:

sometimes there is 1AM transistors.. anyhow they are general purpose NPN transistors..

[MacNB]

I recently boufht a HEX-V2 (not real) with 18.2 s/w and f/w which included Kolimers Loader.
It had the bootloader so I updated it 18.9.0 (one of the first versions by RT dated 27/09/2018 thanks to a member here).

vcds-18-9-about-new-2.jpg

Did an autoscan on my new Polo 6C successfully.
Managed to enable Needle Sweep/Staging in the 17-Instruments cluster

Then I tried test the cable to some output tests on the convenience module.
But non of the tests would work. But mostly I get an error usually "Refused by Control module".
E.g. I tried to fold in the electric mirrors:

vcds-output-test-mirror-fold.jpg

So I can code but cannot perform Output tests.
What could be the problem ?

[vaicekas]

So I can code but cannot perform Output tests.
What could be the problem ?

if it's a MQB platform, then vcds will not handle it completely

[MacNB]

if it's a MQB platform, then vcds will not handle it completely

I believe my 2017 Polo 6C is Mk5 based on PQ26 platform and not on the 2018 mk6 (based on MQB A0 platform).

[muscles1960]

I recently boufht a HEX-V2 (not real) with 18.2 s/w and f/w which included Kolimers Loader.
It had the bootloader so I updated it 18.9.0 (one of the first versions by RT dated 27/09/2018 thanks to a member here).

vcds-18-9-about-new-2.jpg

Did an autoscan on my new Polo 6C successfully.
Managed to enable Needle Sweep/Staging in the 17-Instruments cluster

Then I tried test the cable to some output tests on the convenience module.
But non of the tests would work. But mostly I get an error usually "Refused by Control module".
E.g. I tried to fold in the electric mirrors:

vcds-output-test-mirror-fold.jpg

So I can code but cannot perform Output tests.
What could be the problem ?

I've got a Polo 6c 2017 GTI. I'll check mine on Wednesday when I have time and report back. Done various adaptations and long coding but not tried live data output.

[Aramos95]

Can someone send me the activation file for my vcds loader 1.12 vcds 18.2.1 English, please?

thanks

request_license_dd0804e7.rar

[MacNB]

I've got a Polo 6c 2017 GTI. I'll check mine on Wednesday when I have time and report back. Done various adaptations and long coding but not tried live data output.

Cool. thx.

[X99]

Yes, VCDS software can brick your interface. It's what it was designed to do
It writes in EEPROM A1, A2, A3,.... An B1, ... Bn, etc to certain section instead of actual data.

Please post PCB of your Fake-V2

Do you mean the following info: HW version: 0x46 / FW version: 1.96

I read that info out from the interface, or do I need to open the interface to get the needed information?

[kaalis]

Yes, better open it to see atmega and other parts.

[fantomel]

Maybe someone needs them, can look a little here.

Or maybe want to look here also.

[dj2d]

please delete.

[joaopedro1520]

Hello everyone, I have a 18.2 cable and when doing long coding changes my coding is accepted but not saved. What can I do to fix this?
Also is my cable able to be reflashed to the 18.9 ? Hope you can help me.
Here is the PCB
https://imgur.com/a/MKK3r4K