VAG-COM/VCDS EVERYTHING

**kolimer** · 21st March, 2017, 03:36 PM

Originally Posted by 34260551

The vcds_17.1.3_cracked.exe may not be perfect
Although can change this instructions
00495D5B CMP EAX,00000020------->CMP EAX,0000000
......
But VCDS will check the integrity of the code
00495D8B PUSH 00000020
00495D8D POP ECX
00495D8E CMP DWORD PTR [ESP+20],ECX
00495D92 MOV AL,BYTE PTR [ESI]
00495D94 JGE 00495DA6
......

Thank you, fixed.
VCDS_17.1.3_v2.zip https://mega.nz/#!oyowxRDY!1vVTUiAJD...ABkmS-Qtlrjupo

**kolimer** · 21st March, 2017, 03:41 PM

Originally Posted by FoxMulder

OK . How is the connector laid ? To connect it?
Look picture:
Attachment 437180

Thanks

Gesendet mit Tapatalk

See the picture http://www.obd2cartool.com/vagcom-16...version-p-1266

**FoxMulder** · 21st March, 2017, 04:45 PM

Yes . Photos look like mine. No designation of the connectors

http://www.digital-kaos.co.uk/forums....php?p=2986116

Gesendet mit Tapatalk

**RogerioAndrade** · 21st March, 2017, 06:23 PM

Originally Posted by kolimer

I want to publish new cracked VCDS version 17.1.3. Inside the archive there is HWType detect tool, ATMega dump (FW+BootLoader for HW type 0x44 & 0x46 + EEPROM), FTDI EPT and XML file, original installer and cracked exe. Cracked exe disables internet connection to ROSS, marriage with FTDI Chip ID and clears blacklisted serials.

Tested on my car and it is working.

The archive can be downloaded from http://www.mediafire.com/file/tl25s9...CDS_17.1.3.zip

Great job Kolimer!
Specially the included "hwtype tool". It made possible I realize my Chinese tool (that without GAL) is "0x44" and use correct dumps!
Your "VCDS 17.1.3 crack" opens almost all function. Actually, all that I wanted (Folding mirrors, etc).

Now, I've successfully tested versions 11.11.3, 12.12/11.11.5 and 17.1.3 posted before, here and in this thread: http://www.digital-kaos.co.uk/forums/showthread.php/237263-VAG-COM-VCDS-LATEST-DUMPS

Special thanks to mattydr67, fantomel, alexm1 and kolimer

Greetings,
Rogerio

**RogerioAndrade** · 21st March, 2017, 06:30 PM

Originally Posted by FoxMulder

Yes . Photos look like mine. No designation of the connectors

http://www.digital-kaos.co.uk/forums....php?p=2986116

Gesendet mit Tapatalk

FoxMulder,
Take a look at "Tutorial" posted here some time ago.
This connector helps you to connect external programmer!

Cheers,
Rogerio

**FoxMulder** · 21st March, 2017, 06:54 PM

Hmm .I know for what that is the header .
Find nothing about OBD2Cartool VCDS with programming header and Connection to usbasp

Accurate allocation

Gesendet mit Tapatalk

**kolimer** · 22nd March, 2017, 09:34 AM

Originally Posted by FoxMulder

Hmm .I know for what that is the header .
Find nothing about OBD2Cartool VCDS with programming header and Connection to usbasp

Accurate allocation

Gesendet mit Tapatalk

Header pinout

Interface.jpg

**fantomel** · 22nd March, 2017, 07:38 PM

Maybe this will help you all to connect VCDS to a programmer.

**1 6 D** · 22nd March, 2017, 10:27 PM

Great work, Autoscan is going better, but long coding still doesn't work. In previous crack and this there is problem with searching ASAM data for UDS modules, it changes names, there should be "EV_Kombi_UDS_VDD_RM09_A04..." but it searches every time other like: "EV_KombiU_DS_VDD_RM09_A04","EV_Kobmi_UDS_VDD_RM09 " or "EV_Kombi_UDSV_DD_RM09_A04" or other with mistakes.

**hass42** · 24th March, 2017, 06:18 PM

Hey all I'm trying to use kolimer 17.1.3 software with my fly508.

Has HW0x46

Anyway I can do this? If so I would need help locating FTDI and ATMEL

Thanks

Hass42

**alexm1** · 24th March, 2017, 08:22 PM

I think your tool is for:
Honda HDS、Ford and Mazda IDS、Landrover JLR IDS、Toyota TIS.
Kolimer software is for vcds=VAG GROUP.

**hass42** · 24th March, 2017, 08:33 PM

Originally Posted by alexm1

I think your tool is for:
Honda HDS、Ford and Mazda IDS、Landrover JLR IDS、Toyota TIS.
Kolimer software is for vcds=VAG GROUP.

its also for vcds

**mattydr67** · 24th March, 2017, 08:52 PM

Mate do not make confusion between VAG Group and VCDS tool
Fly is a diffrent tool then VCDS
Your tool will not work and you cannot make it works with VCDS Ross-Tech softwares ever.
This is what alexm1 wanted to tell you
Good luck

**hass42** · 24th March, 2017, 08:56 PM

Originally Posted by mattydr67

Mate do not make confusion between VAG Group and VCDS tool
Fly is a diffrent tool then VCDS
Your tool will not work and you cannot make it works with VCDS Ross-Tech softwares ever.
This is what alexm1 wanted to tell you
Good luck

Thank you
How about this cable?
What would I need to do for this?
It's not in PDF supplied?

Hass42

**mattydr67** · 24th March, 2017, 09:03 PM

This is a VAG Commander I suppose
Also you cannot make it works
Mate take a look in this thread and you will can see many pics of VCDS
Most of item bad one but others good one
Good luck

P.S.
VCDS must have:
Atmega162
GAL/ATF16V8
MCP2515
TJA1050 (MCP2551)
L9637D ( tranzistors in other cases )
FTDI BL or RL