belkor (22nd September, 2018)
LOL, those russkies steal and copy everything; starting from Concorde ending by VCDS/Vasia and now they got their hands even on kolimer's loader... Strange how they diidn't amend his banner.... Come on, make something on your own, at least once in a history!
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
belkor (22nd September, 2018)
Who helps people - he spends time in vain)))))), funny but .... no one appropriated the merit of a colimer, the case in the flash driver in which there is no choice of language, unlike the brewer in the package 6.3.
Perhaps all the problems are due to the curved interpreter.
Last edited by Roma77; 28th May, 2019 at 06:03 AM.
The software you provided was re-worked by russians.
And kolimer's stuff always had an ability to choose the language, where it was required
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
hi guys ive successfully reflashed my vag 178 interface 0x46 but im still getting the same error as i was getting before when plugged in the car and I click test I get interface no found. did I need to do anything else after I flashed with usbasp ?
thanks again
Try: vcds
It's written in txt file from archive.
But vcdsloader is the same as v6.3 from original.
liviudiaconu (24th September, 2018)
Hello guys how can i update this to Danish langauge?
When i try with kolimers package it says "Not in bootloader"
Do you know the pinouts for this?
image2.jpgimage1.jpg
Really bad image. Can't see sh##t. If you don't see atmega162, then it's not possible.
belkor (24th September, 2018)
Guys I'm still getting interface not found when plugged in car do I need to do anything else after I've flashed with USBASP?
xoom do I need to run vagcom_eewrite.exe while it is connected to USBASP?
no need usbasp.. only put 12V to cable (pin 16 - +12V , 4-5pins - GND)
Hi i have this
20180917_023746.jpg
and Polish version 17.1.3 how update to 18.2.1 english or polish? With loader v6.3 not work polish and english version 18.2.1
Last edited by atmpitbull; 24th September, 2018 at 09:09 AM.
use 18.2.0 english + v6.3 loader
Bookmarks