VAG-COM/VCDS EVERYTHING

[2xded]

how do I do it...?

Use the VCDSLoader v5.

[safm]

Hi,
Anyone could advice me where to buy a good quality VCDS clone in europe?

Thanks in advance

[Dynamicdk]

With MProg 3.5 change PID to FA24

Now I can program a serienumber to my cabel with MProg 3.5, I did use ftdi_mprog_BMBL.ept - right or wrong..?

What do I do next then

[xoom]

Now I can program a serienumber to my cabel with MProg 3.5, I did use ftdi_mprog_BMBL.ept - right or wrong..?

What do I do next then

Manualy set PID to FA24 and try EE_Write

[hid3]

I don't see a reason to set the PID to FA24 at all. It's doable with FA20, which is what's supposed to go with that hardware.

[alexm1]

Just replace FA24 with FA20 in the eewrite.exe and hit write.

[kevino]

please pinout of usb connection for that cable. I think iot is 805 version. I try repair maybe...

thanks

[openit]

"Interface not found"?

EEWrite_lang.exe - yes
HWType.exe - yes
Progisp v1.72 - yes

Using windows 10

Attachment 509217

You can use extreme Burner to chip erase and reflash with .hex files , or you can use avrdude with the includet USBASP_write....... bat using a usbasp programmer.

[alexm1]

please pinout of usb connection for that cable. I think iot is 805 version. I try repair maybe...

thanks

See link below (mcp2125 is the best choice for your cable)

http://obd2-diag.blogspot.ro/2017/08...anual.html?m=1

[Dynamicdk]

Manualy set PID to FA24 and try EE_Write

Now I can Program with EE_Write when I use this "fileeepromavr_HW_0x44_NEZ.bin" no problem
But when I try my VCDS NEZ program, I says that my cabel is unregistred

What then..

[alexm1]

Try english vers. and see if it is working...

Did you delete main shortcut and create a new one from the vcdsloader that allready was copied in the installation folder?

[Dynamicdk]

I dont have the english version

[alexm1]

Rollback a few pages and get files from v6.1 loader zip post it by Kolimer

[Dynamicdk]

Rollback a few pages and get files from v6.1 loader zip post it by Kolimer

it is only the loader, not the vcds program

[networkers]

Two versions of 17.8.1 en https://mega.nz/#F!or5AQTwY!GxLeQwZkfOaogV0HCERViA
One (V1) is working with v5 loader, second (V2) should work with v6.x loader