VAG-COM/VCDS EVERYTHING

**alexm1** · 22nd May, 2017, 06:37 PM

A picture = 1000 words......share a few pics...

**cypher007** · 22nd May, 2017, 06:47 PM

this is the usb adapter: https://shop.openenergymonitor.com/p...o-serial-uart/

ill open the vcds and take some pics tonight.

**pepeEL** · 23rd May, 2017, 10:57 AM

Originally Posted by kolimer

Should work. It is not FT version dependent. If you use adapter with protection chip and vcds loader, you must first unlock the adapter by running the loader and then use HW detection tool.

Hi all

I have a question. I have now Interface VCDS 11.11 PL/EN (language). It is on hardware which i show on images in link below:

https://goo.gl/photos/Lnb21G1m4pZvpCXu5

Is any chance to change this FW and done this interface to work with VCDS 17.1.3 ? Please help me step by step how i can do it. Sorry for my english

**cypher007** · 23rd May, 2017, 02:09 PM

Originally Posted by alexm1

A picture = 1000 words......share a few pics...

pics:

http://i232.photobucket.com/albums/e...f4f7489bcc.jpg

http://i232.photobucket.com/albums/e...25957_HDR1.jpg

http://i232.photobucket.com/albums/e...23_1300421.jpg

http://i232.photobucket.com/albums/e...30055_HDR1.jpg

**lokipepe** · 24th May, 2017, 02:22 PM

Push
I'm looking for a dump for VCDS 17.1.3 german.
Is there already something?

**rakidzic1** · 24th May, 2017, 09:51 PM

My small contribution to this thread.
In archive how to ubdate vcds hw044 with upa usb.
thanks to Kolimer!!!vcds 0x44.rar

**stonecoldro** · 25th May, 2017, 05:59 PM

Hello all,

I have a hw46 board as reported by the HW detection tool. From the pics below it seems it has programmable headers (please see pics).
I also bought a usbasp v2 interface, but have no idea on how to connect the pins to the programmable 6 pins. Since my soldering skills are very bad, I would like to use this instead of wires the atmega chip.
18745380_1903851866307264_1875977185_o.jpg 18742196_1903851862973931_185765460_o.jpg 18698693_1903852562973861_1701239100_o.jpg

Any guideline would be appreciated. (sorry if my question seems silly, I've gone through the whole thread but didn't find any answer)

Thanks!

**stonecoldro** · 25th May, 2017, 06:00 PM

......................... bad post

**ni88l3r** · 25th May, 2017, 10:42 PM

Originally Posted by 34260551

I havent a real dump for VCDS 17.1.3 german,but I can use it.
Attachment 450626

How did you manage to get it to work?
Just installing GER version?

**34260551** · 26th May, 2017, 04:21 AM

Originally Posted by ni88l3r

How did you manage to get it to work?
Just installing GER version?

if you have a cable with FT232RL, Atmega 162, 16V8b，reprogram 162 and use cracked version

**pepeEL** · 26th May, 2017, 08:41 AM

Originally Posted by rakidzic1

My small contribution to this thread.
In archive how to ubdate vcds hw044 with upa usb.
thanks to Kolimer!!!vcds 0x44.rar

Can you write step by step and what Software use to program it ? And how identify cable ? How reconized 0x44 and how 0x46?

**ni88l3r** · 26th May, 2017, 04:46 PM

Originally Posted by 34260551

if you have a cable with FT232RL, Atmega 162, 16V8b，reprogram 162 and use cracked version

You mean flash with it with the latest Firmware from Kolimer, install VCDS GER and use Kolimers cracked.exe to start it?
So no need for a GER version dump?

**EpicFail78** · 26th May, 2017, 08:55 PM

Originally Posted by ni88l3r

You mean flash with it with the latest Firmware from Kolimer, install VCDS GER and use Kolimers cracked.exe to start it?
So no need for a GER version dump?

Not work, You need a cracked german exe.
Have test it self.

**ni88l3r** · 26th May, 2017, 09:09 PM

Originally Posted by EpicFail78

Not work, You need a cracked german exe.
Have test it self.

So you mean 34260551 cracked the german version himself? Interesting :-)
Then I have to look for my dissassemblers and try to do it myself.

Thank you!