doctore (30th April, 2018), TukoSalamanca2 (30th April, 2018)
I see there is a new tool by Yanhua coming soon to do BMW FEM/BDC/CAS4 without soldering or removing eproms.
ACDP.jpg
doctore (30th April, 2018), TukoSalamanca2 (30th April, 2018)
Prices yet to be confirmed, but I've been told it's modular.
You have to purchase the main hardware and then you can add-on different modules, e.g FEM/BDC module, CAS module, read DME ISN module and a couple of other modules.
Price is 1049 USD
Very interesting
Last edited by auto techniek; 30th April, 2018 at 10:29 AM.
If it was by obd it cool. Now you still meed remove modules. I wouldnt risk with this kind off tool do cars for 20-50k
Renault ECU tool / IO terminal / A.S.W
would prefer it to be controlled by a windows environment, rather than a phone...i like the jigs though
doctore (30th April, 2018)
Yepp nice tool again. I assume almost zero support and tested on only one car with one exact sw version. Beta of the beta.
Sir, are you classified as human? Negative, I am a meat popsicle
IMGP8382-500x500.jpgNice touch holder.
doctore (30th April, 2018)
I think will be same story like with some FVDI clones...30% or more work.. most not work
currently im only doing bmw with cas 1-3 and ews my lonsdor can do cas 1-3 it will only add keys to 3+ and up. I just dont like to solder so I figured this too would simplify things abit and make it faster
Any real test results?
Bookmarks