Had a 13 plate a couple of months ago doing same. ECU shit itself for no reason. 2nd hand ECU fitted then to Ford for programming "as built" because normal incode/outcode wouldn't work.
Hello. I have a problem with ford kuga keyless. No ignition, no start, steering wheel are locked. All fuses ok. No faults in remote keyless module, no faults in GEM module. Car locking and unlocking with remote, battery are good. I try both keys, but no luck. Try disconect battery, no luck... can someone help me please?
Had a 13 plate a couple of months ago doing same. ECU shit itself for no reason. 2nd hand ECU fitted then to Ford for programming "as built" because normal incode/outcode wouldn't work.
V Series TMS470 / EEPROM data - encryption / decryption, totally pwned.
IEC 62056-21 - new discussion: sonsivri.to/forum/index.php?topic=60412.0
I try to feed 12 v to 19 fuse in engine bay to turn on ignition manualy. In engine ecu vas fault p1622 immo id not match, but I erase fault, and no faults come on. This peace of crap still no start.
Problem vas a bad electronic steering lock
Hi
I have the same problem with Ford Kuga mk1 2012 , i don t have ignition on dash ( only km see ) .I remove the dash and i power it on tabel and all lights are on.
The batery are ok ( 12.39 V ) also the both key batery are ok ( 3,30V ).
The steering is not bloking and work , because i push the car, also the remote from key work both .
If someone have any idee about this problem , please write , any sugestion is wellkome.
Best regrads
Meat-Head (15th May, 2022)
No, nice to see recycling going on in the forum
have a look in trunk lefthand side, earth point, beyond that no
focus though
Was Banned For Being Certifiably Insane and Stupid
catalinosonesti (15th May, 2022)
Meat-Head (15th May, 2022)
Ok google the part number but understand that to be the other end to the starter button
Was Banned For Being Certifiably Insane and Stupid
catalinosonesti (16th May, 2022)
Basically, I tried to put a navigation that has the built-in climate and having the power plugs just like on my car. The space behind my Visteon V series radio is not permanently mounted large ships. I gave up the idea and mounted the car's radio and climate, and since then the car has not started, the windows do not work, there is no contact, only the central locking works.
Trapped wire or shorted canbus
Was Banned For Being Certifiably Insane and Stupid
catalinosonesti (17th May, 2022)
Thank s , i will chek the canbus and wires .
I Post the result.
The plug in are the same in car what i have clima but i think the NX navigation some Pins are diferent .
That s i think i burned some think.
It works only central looking,no start buton,no emergency Light,no Light.
Thanks for your time spend to help me.
Hi , again ,
I recive a call to the workshop and they told me the problem is not about wires , conection or CAN comunication . Something in the sterring module not reconize the 0 posiiton of the stering that s why i dont have ignition.
It s could be posible ?
They manage to conect with tester on the car and i don't have any error on the Gem module.
What can do to put in 0 position that module ?
Best regrads
No sounds like corruption of module
Was Banned For Being Certifiably Insane and Stupid
Hi .
Still no ignition , i change start button, Gem module ( fuse box) in the car , anttena all 3 are ok ( see the key ) , but no ignition .
I have this error :
RKE - P1367-60
RKE - B159A-60
What can be damage on this car .
I never ,never , never try to put original Navgation HSRNS on ford kuga mk1.
My wrong cost me now .
How can help me with some advice i will apricate.
Best regads
Hi
I recive an ignition diagram , and i see i have 2 wires on the start button how go to the RKE module how is back in the car , if the wires has continuity then the module have problem .
From were i must to take data to write again this module , or what i can do to delete this error : P1367-60 and B159A-60
Best regrads
Bookmarks