maybe try this posted by millzzy
http://www.digital-kaos.co.uk/forums...kur-v9-268189/
Hi guys
just wondering if there any way to get this box up and running again
i have tried to manually installed mgcamd with no joy tried other make of
itgate images with mg on it but box won't install image either.
the image on my box is ukur 7.9 any help would be great full.
or are they a image out there that has mgcamd on it for a tgc200 if so
can yous point me in the right direction please
maybe try this posted by millzzy
http://www.digital-kaos.co.uk/forums...kur-v9-268189/
Last edited by mept1; 16th December, 2014 at 05:25 PM.
plasterer (16th December, 2014)
Thanks mept1 I try that tomorrow when I get a chance off to work tonight
mept1 tried the mgcamd install did not work but managed to change image to nemesis 4.4 and was able to install mgcamd but now my var/keys folder is empty
how do i get all the key information back any help would be great(i did not do a backup of old image)
sent you a pm with a link from a working itgate key pack
thanks mept1
Hi,
Haven't been on the scene for a while, and have an old itgate tgc200 from the good old days with 7.9 on it.
Is it possible to get this back up and running.
Cheers.
Yes for both sat. And cable depending on Tuner installed
If your Happy with the Help push the Thanx button
PAUL
mept1 (24th April, 2015)
Gonna try and get my 200 cablebox up and running again. Can someone tell me if i need a seperate file to install on the box called "mgcamd" and if so where can I get it. I have found EDG Nemisis 4.4 and downloaded. Also is there a step by step walk through with the ftp procedure.
Many Thanks in advance
Dave
This is what happens when you spend a fair bit of time away from the forum in 5 years the Rules have changed and all Cam/Card Sharing discussion is now a No Go
Bookmarks