Hi
we must all recode with diagbox.
Hello,
I have a big problem
I have 2 BSI.
1. BAD BSI - from 206 1.9D 9645747490 (attachment file)
2. NEW BSI - from 206 1.6 16V NFU 9646777380
I changed from BSI 1 EEPROM 95160 to BSI 2, but the vehicle does not start, PP2000 does not see the VIN
Where problem? I must virgin for new BSI?
Hi
we must all recode with diagbox.
Small circumstances produce great events : 02.47-tranquillité:
ok, do i need a virgin BSI?
Yes, you do need.
can i ask for the virgin from the attachment above?
This is your file.
pin code: UKA7.
remember the buttons.
ChouLu (15th October, 2018)
..........
Last edited by kiszka; 24th December, 2018 at 11:09 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
galaxy0634 (15th October, 2018)
I'm confused ? UKA7 or OKDJ?
Apologize for my ignorance, but ...
This file is from bad BSI. Can I copy it to a new BSI and then set it through PP2000?
Or do I need a file from the new BSI and make it a virgin?
..........
Last edited by kiszka; 24th December, 2018 at 11:09 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Friend I feel my mistake.
UKA7 is incorrect.however my calculations say correct pin is: DJYXvin: VF32AWJYF2025301
Friend I feel my mistake.UKA7 is incorrect.however my calculations say correct pin is: DJYXvin: VF32AWJYF2025301
ChouLu (15th October, 2018)
Puedes comprobar si estoy equivocado.
friend kiszka
..........
Last edited by kiszka; 24th December, 2018 at 11:10 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Abdo Abdelatif (15th October, 2018), ChouLu (15th October, 2018)
ECU file say what is the correct
Last edited by alefabi2006; 15th October, 2018 at 06:02 PM.
Yes, VF32AWJYF42025301 is correct
so the pin is OKDJ Thanks
File in attachment in first post is from original BSI.if you do not have the original BSI eeprom
you must read the eeprom ecu to recover
original pin
Thank you very much, I will try all this weekend
Last edited by ChouLu; 15th October, 2018 at 10:27 PM.
When you swap only eeprom to doner BSI, car will see BSI virgin.
Just use pin and recode. Tested many time
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
Bookmarks