is it tested because car is far away thx
Looks pretty much same as a 1m100 forte I just did that went ok, just wait for others then. I don't want blame if doesn't work out for you.
gselectric (16th December, 2017)
hiiii sir no dtc but light still on
Check pretensioners, sometimes light on but no errors when pretensioners bad ...join resistors 2,2ohm and clear errors ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
narkeleptk (17th December, 2017)
I dont have the clear anymore to post, so feel free to share it again. Maybe Dragon can check it better for you, he is much more experienced in clearing.
There was 01 on line i think 3240 x03 that might need to be 00. It was slightly different in the file i was comparing with so I left it alone thinking it was just some of the part#.
Last edited by narkeleptk; 17th December, 2017 at 09:08 PM.
gselectric (17th December, 2017)
Check this, pass in pm.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
gselectric (17th December, 2017)
thx both r same dumps i will try pretensioners
here is 100% working dump
Actions speak louder than words
hello today car passed by when i put original crash dump i can connect scannere ,but i tried all posted dumps scanner cannot get into airbaG AND LIGHT STILL ON ANY HELP PLEASE?
Bookmarks