2J74Y mask have common issue.You have to change MCU or try to heat them and read again.
I have 002 545 94 01 ....worth to try
Your dump look strange on some places...
Good luck !
MB W203 C200, 2001year. Car has electrical problems.
I look for flash to compare or somebody who can check if mine is good.
Front SAM 002 545 93 01
5DK 007 973-20
Q:12 HW:2100 SW:3000
Motorola 68HC908AZ60 2j74y secured, read by ETL.
Thanks and Merry Christmas Everyone!
Last edited by atd; 17th December, 2012 at 06:43 PM.
Magicmotorsport Flex Full, Magpro2, Swiftec, Winols, full ETL, Carprog and others....
2J74Y mask have common issue.You have to change MCU or try to heat them and read again.
I have 002 545 94 01 ....worth to try
Your dump look strange on some places...
Good luck !
'
'
'
'
'
'
'" live and learn........ if you wont ....you ain't "
'
_______ . ____ . __ . __ . _______ . __ __ __ ... ---
If my post was HELPFUL please push THANKS button
LuisBand (18th January, 2017)
Thanks baltazar. I compared and will try tomorrow with your flash. If it wouldn't help I will buy new front sam.
I tried with new 2j74y programed original dump but still same problem...
Regards
Magicmotorsport Flex Full, Magpro2, Swiftec, Winols, full ETL, Carprog and others....
Car has electrical problems?????what problems?and you can use a used one not new.
I have solved the problem by replacing sam module. I bought exactly the same numbers front sam and everything is fine.
The problem was drain battery. CAN bus in the front sam was failure...
Programming the 2j74y didn't solve the problem. I tried with new and original az60 with different dumps...
I think that can controller may be the problem.
Magicmotorsport Flex Full, Magpro2, Swiftec, Winols, full ETL, Carprog and others....
I have the same exchange problem helped
hello thanks ..
Bookmarks