had you scanned all modules ?
had you scanned all modules ?
any information provided is for educational/experimental purposes only.
yes, there is no fault codes.
in blocks does it show rpm ? have you tried easy start spray ?
any information provided is for educational/experimental purposes only.
I see the rpm increasing and the fuel pressure too (60 to 500 bar)
I haven't yet tried the easy start spray.
hello. year the car please?
Hello ! vw crafter 2.5 tdi bjm
year : 2006
Hello ! vw crafter 2.5 tdi bjm
year : 2006
let's ask the question , was it running and something was done then no start , did it come in not starting , a bit of background info would help , and I was at vw 6 years working on this things and fault do not always log the first time , so crank it for about 20-30 seconds and don't switch off the ignition and scan again , if no fault then u might have a mechanical fault , did u chech the injector return flow rate
Sent from my HUAWEI Y560-L01 using Tapatalk
Ask a dumb question and become wise for the rest of your life, but act wise and stay dumb
fmcdiag (6th November, 2017)
I stopped for 10 minutes and after the car didn't want to restart.
I'll try this and i'll tell you the result.
I haven't yet look at the injector return flow rate.
Thanks
I have not yet look at the injector return flow rate
Last edited by fmcdiag; 6th November, 2017 at 04:40 AM.
It's resolved !
The failure was caused by bad remapping.
Bookmarks