BDM ori data and start again.
MPPS doesnt recode config data such as inj coding on Renault or PSA, so best to use tool that does or BDM.
Hi guys, have a renault megane 2003 edc16c3 which following a bad read with mpps v10 has left the ecu with no injector coding. All injectors show a coding of A. I have tried to manually program the injector codes with clip but it fails stating internal electrical failure.
The car starts and runs but only to 1500rpm, MPPS read the id ok but failed almost straight away when attempting a normal read instructing me to contact amt, my mpps is a clone. Can anyone suggest a fix please?
Many thanks in advance.
BDM ori data and start again.
MPPS doesnt recode config data such as inj coding on Renault or PSA, so best to use tool that does or BDM.
You must code injectors with proper diagnostic tools like renault can clip without any problem, I did it few times!
you can find the codes written on each injector, make sure you count injector 1 from the belt
Cyl 1 is flywheel end
And the injectors code is writen in e2prom -8pin soic
ARe the injectors in the 95160 8pin? If yes is there a way to add them manually (with hex editor?)
just use renault can clip ... in most of cases works great.
Magpro2 / MagBDM / X17 / New Genius / Powergate Full / MPPS / FGTech / WINOls 2.20 and much more ...
Chiptuning / DPF OFF / EGR OFF / Hot start - solutions ...
MBTUNING.RO
It is weird that can clip won't program the injectors for this ecu!!!! I've tried another ecu with different numbers and it worked,,, but not with this one!
That why i'm searching for a way to add them manually via the eprom
The codes are inside eeprom in hex format,read eeprom of the spare ecu and then program some injectors to it, read eeprom again you will see where they are stored
Kess v2 FW 5.017 full unlimited token - Ktag 7.020 full unlimited token
ALL EDC17/MED17 EEPROM CHECKSUM + VAG IMMO OFF BY EEPROM - NO SAFE
EDC16/17 POPCORN - ME7/7.5 ANTI LAG - LAUNCH ALS/NLS
DPF EGR DTC SCR, Custom Tuning, Damos Translation, FRF / SGO Files
Professional Engine Software Development
THe problem is that the Injector codes are not in plain text (in the hex format)....but are encrypted!!!
i have similar problem with renault master2 and my clip can is bricked
Easy with Galletto4. Need to read injector file, save, repair it and upload to ecu.
Bookmarks