depanatorul (31st August, 2017)
I have 8 units of BMW MULF modules, most of them year 2004.
Problem is in damaged solderings of BGA and after it - bad software.
Product codes with 6946393, 6953044, 6938943, 9123290, 9116725.
There's Motorola CPU XC540203CZT75, Mask 2J13D.
I know there's most of time hardware problem, can solved by resoldering BGA's. But software is also damaged.
My question is, is there any possibility to read/write thru BDM CPU and external flash 28F128J3C150?
Has anyone done this and what software/hardware used?
I tried to flash via WinKFP, no success, product code corrupt or rebooting all the time.
If BDM connection does not help, is there anybody who has working unit, BGA64 reading possibility and will make me a good working dump for 28F128J3C150 flash(i can read/write flashi with Beeprog2) Or maybe even has it already?
Any help would be great!
depanatorul (31st August, 2017)
99,9% the damage of the content flash 28F128J3C. Only soldering never helps. Checked on a dozen or so pieces.
I enclose the file with the new program. Will heal every MULF. Beeprog in this will help.
I think, that I helped.
amor89 (23rd December, 2017), asliyucegsm (2nd September, 2023), Col19 (16th January, 2020), darka7 (11th September, 2017), depanatorul (31st August, 2017), DOUGLASDL (17th September, 2017), elephantul (6th January, 2017), eLKa (8th February, 2019), elmaro (17th November, 2018), h0ly (13th September, 2017), kaleval (21st December, 2018), line44 (27th February, 2021), mer6 (20th March, 2018), MOBILTRONIC (18th January, 2020), moserts (15th January, 2020), Raptor181 (12th January, 2018), riker82 (13th May, 2019), Sazeck (4th February, 2020), sbalazs22 (11th September, 2017), sebastian (26th August, 2018)
Hi every one i have a mulf2 usb unit that turns on and the fiber optic has light coming out , but i cant read aif and i did try to flash with Winkpf or with Expert mode, no luck! any one any idea? i have xprog will that help me in any way to restore it? i need dumps to, but not for mulf1 - i need it for mulf2 high usb. thanks
hmm=? pls help
Hi mates! Is there any way for read 28F128J3C on board without BGA?
Thanks in advance
Hello
I also have problems with the module mulf,
But just sound cuts when it's hot in summer,
Do you think there may also be a programming problem or a bga hs solder?
Thank you
Hmm someone must know the work around on these units
Oh and by the way if my post has been at all helpfull
please press the little THANKS tab
Hello
ChipProg-48 or Beeprog2.
So the flash is always needed to desolder or is there jtag pins somewhere?
Anything new on these?
Hi, I can't download this rar Someone can send it to me? Interested in repair of MULFs
Bookmarks