no separate procedure for keylessGo , remote will work after transponder programming , if you replace Megamos id48 , remote will not work .
Hi, i buy some remote used OEM but refurbishing by new transponder for mk6 with keylessgo entry. so did any one have idea if this remote after programming can work it self the keyless function? or i must adapt by 09 module the lock unlock by diagnostic tool?, thanks in advance...
no separate procedure for keylessGo , remote will work after transponder programming , if you replace Megamos id48 , remote will not work .
you have two choices in the morning: go back to bed and continue dreaming, or you get up to make your dreams come true
pouleddy (22nd January, 2018)
remote will adapt by itself when you program key
pouleddy (22nd January, 2018)
i wtote about the proccedure,i think tha tey are reusamble but first write page 10 and 11 0000 so anything goes wrong you can try again
first , what device you'll use to this Job ?
you have two choices in the morning: go back to bed and continue dreaming, or you get up to make your dreams come true
hi, did any one have an idea what I must to do to work the keyless go of the remote? I adapt the remote key the car now start urgent when I put the key near the immo coil, is any one have solution please for keylessgo? thank you in advance...
pouleddy (29th January, 2018)
Hi, thank you for your answer, but I do same as you write to me, and I follow well the procedure of vvdi2 it so easy,but when finish the programming,& the car just start when I put the remote near the immo coil. if the remote far then immo coil then after don't work by the start/stop button, the remote used not new but for keyless system, and the transponder inside it new. so any info I hope some one have solution?
Last edited by pouleddy; 29th January, 2018 at 10:12 AM.
Wrong key ??
Wysłane z mojego SM-G950F przy użyciu Tapatalka
pouleddy (29th January, 2018)
Have you tried new batteries
"I always tell the truth. Even when I lie"
"We Taking Over, One City At A Time"
pouleddy (29th January, 2018)
pouleddy (29th January, 2018)
Bookmarks