It is ordinary HC08 core chip.
Solution for the whole problem will be available soon.
There is another thread in the forum started by me named "Reusing old Peugeot/Citroen remotes".
It is almost everything about the matter there.
It is ordinary HC08 core chip.
Solution for the whole problem will be available soon.
There is another thread in the forum started by me named "Reusing old Peugeot/Citroen remotes".
It is almost everything about the matter there.
Last edited by mihotd; 30th April, 2013 at 05:53 AM. Reason: updated info
Peugeot 206cc 2001
Bsi siemens, 95160 k-line.
Remote 2 buttons.
Transponder, from the remote key, is lost.
Only org remote still works.!!!!!!
2 keys in org, dump. Loaded in Tango.
1 pcf7941 id: Unknown
2 pcf7936 id: Known
Then i added a new pcf7936 transponder to this dump, on position 3.
Car starts, but remote stopped working.
Why does this key:3 stop the old remote from working?
The old keys are still in there.
I tried adding remote manualy, but failed.
Writing back old dump, restores remote.
Only programming the new transponder, does not work either.
I assume that the Pcf7941 is a key with transponder on pcb.
And the pcf7936, is with the seperate, remaining remote.
206 2001 can't have 7941 remote key
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
rob h (23rd February, 2018)
Also remote maybe have lost synchronize because you unplug the bsi. But now because you don't have original transponder you can't synchronize back
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
rob h (23rd February, 2018)
no1 is flip,no2 is your remote,i do not think you can save the remote,just program a new remote maybe?
rob h (23rd February, 2018)
pcf7941 206.jpg
My mistake,
This car uses pcf7946, and pcf7936.
However, the transpondery guide does list a 206, with pcf7941.
I never unplugged the bsi.
Reading and writing by obd, using Smok.
So it has to be, the missing transponder. Even if it is still in the eeprom data!
I am now looking for a new remote key, with matching transponder.
Some, have seperate transponder, and some on pcb.
Not sure wich one i need.
Last edited by rob h; 23rd February, 2018 at 10:31 PM.
206 2001 never have 7946. All this can have only 7936. I have use only original remote on this car. Original remote always have 7936 separate transponder.
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
Rob h if you want send me vin with pm to tell you what is the original part number from remote your car have
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
Thanks, that would be great, here it is:
SW vers.: 24.1
HW Ref.: 9646777380
Prod Ref.: 9646777380
Manufacture SIEMENS
VIN VF32DRFNF42490676
Last edited by rob h; 23rd February, 2018 at 10:46 PM.
No problem. Tomorrow morning i let you know.. Also i think i have done a 206 with kd and work but i don't remember if is cc or no and what year. I look my notes and tell you.
Στάλθηκε από το F3311 μου χρησιμοποιώντας Tapatalk
if i remember correct 206 its a total joke,uses 6 diferrent remotes depending year and fog lights,keydiy has some coverage but not all
Any advice where to buy blank remote key + transponder id 46 for peugeot 307 2002, good quality, already have a chinese one but different to original key.Many thanks.
Vag-com, Op-com, Focom, Autocom,Multidiag, Forscan, Lexia....
I looked to the keydiy option.
Not sure which to get.
There are B series, with seperate transponder.
And NB, those with transponder on remote print.
Only B serie listed, is the 1 button remote, with pcf7935 transponder.
And there is a NB 2 button diplayed with va2 blade, instead of ne73.
I will try these both.
If this fails, i will go for the 6554YR remote.
Last edited by rob h; 25th February, 2018 at 08:41 PM.
Bookmarks