jonny r (23rd January, 2017)
Last edited by gomarota; 22nd January, 2017 at 10:35 PM.
LOVE DK!
jonny r (23rd January, 2017)
Craig coopen (23rd January, 2017), daxxer (23rd January, 2017), rola1971 (23rd January, 2017)
Hey members l have w211 with eis fault on car and it have nec key .l try to read eis with vvdi IR NOT reading even with R270 programer not read it dead but same key from eis it read fine ,so l brought used w211 eis .l need to use on same car how can l programing?.which procedure l must use by vvdi mb tool .thanks
hey members this w21 eis old with motorola mcu , thanks
read your new eis with r270 or some other tool you trust
calculate keys, then write key
then renew esl and me
or try to read at least eeprom from motorola - if you read it then youll dont need to renew esl and me
Were in sa are u sir
ok thanks but vvdi it can finish the job on this?.
please what procedure of vvdi in order to use used eis to work?.l have nec key from preview eis that it fault in order to work on car .thanks
i don't think what you think but i think you are a brainless !!! Chinese server not getting any payments ! so use your brain next time you write instead of showing me NASSER
as i said MR whispers Chinese are off that why i post it here you don't need to each time it's a forum and you are not telling a big secret .
I am I Durban contact me on Skype *Removed Skype Name !! I will help u
Last edited by Johnner; 25th January, 2017 at 08:39 AM.
benzgeek (24th January, 2017), careforever (25th January, 2017), convet 42 (24th January, 2017), djollie (25th January, 2017), drivesure (24th January, 2017)
Yes, Samic is very disturb, because he is technical support for all of the world...can't answer everytime quickly when you need some help...
I help only when i know or have some info about that...
AVDI is AVDI, all who have this tool know what is good or not....and for this you use AVDI thread when you want to post something there about this tool :-)
this Thread is only about VVDI MB BGA key tool...
this is very good when you read all posts in this thread some users not read anything and post again and again some his ASK about HELP... instead of that,
when his problem was many times in this Thread described.....
Hello. I have several times asked for help at the forum. But nobody has answered or helped me with my problem. I wrote the following on page 124: ?Please, help me. I cannot calculate erase pass for EZS A 212 905 58 00. I made several calculations, but VVDI could not calculate: "Erase pass not found"
Last edited by vikx; 25th January, 2017 at 08:14 AM.
I would advise you go read the rules here mate....they're here for a reason
Forum Rules
Thank you...
Aaahh ! I love the smell of Eeprom in the morning...
" We'll come in low out of the rising sun, and about a mile out, we'll put on the music . . . "
Bookmarks