with tech 2 choose the engine x10xe then go to programming or progamme immobiliser function and start the programming thats all ,you will not need any security code
Hello,
i need to virginize a m1.5.5. But i can't do this with carprog. With this tool, i can only read out the ecu. If i give this ecu to my friendly opel dealer, he can't virginize it with the securitycode. Have anyone a manual, how to do it with the tech2? I think, the dealer has no fun with this work, and without a manual, he won't do that. Can he do this in the car? I think so.
if i read the 24c16 out with a programmer. Can anyone say what i must do to virinize the dump?
What happens, if i play a emty dump into the ecu?
By the way, the dump with the programmer is not the same like the dump from carprog. But the dump with the programmer is correct, because i can see the VIN.
The car is not in my near, so i can't test it directly.
Thank you,
Chriss
with tech 2 choose the engine x10xe then go to programming or progamme immobiliser function and start the programming thats all ,you will not need any security code
Last edited by saka112; 19th March, 2013 at 11:35 AM.
Hello saka112,
the technican from opel says, that he can't programming the ecu over the immobilizer. He called me via telephone, while he tried to programm the unit. We tested some ways together. He says, that the ecu must learned out in the old car, and he don't know at wich place in tech2 he must give the old securitycode in. But he was not a King in tech2... He tested to learn in the ecu, but it's don't running.
Okay, i tested to delete the eeprom (FF). The Diagnosecomputer says now Memoryfailure. With the old memory it's all okay.
Last edited by Chriss71; 19th March, 2013 at 11:23 AM.
This is the procedure but with OP COM 2010.Work perfect, tested by me last week on Opel Corsa C 2001, ECU M1.5.5.
Yes you can install ECU from Scrap Yard as long as you have pin code for the Scrap Yard ECU and the Pin Code for the Vehicle you want to install in
1) log in to your Original Car Immobiliser Enter the Pin Code and reset your Immobiliser.By doing this means your Immobiliser becomes virgin.Log out from Immobiliser.....
2) Remove your Original ECU and fit the ECU from the Scrap Yard.
3) Log in again in Immobiliser and now Enter the Pin Code for the ECU from Scrap Yard than Select Replaced Immobiliser.By doing this your Immobiliser will copy all Security Files from the Scrap Yard ECU.Than Program all your keys back in.Some times you might need new Transponder Chip.
Also remember to reset the Instrument and the BCM and then Program it back with the Pin Code from Scrap Yard ECU.So your new Pin Code will be from Scrap Yard ECU
NOTICE: Remember all the Pin Codes when you Enter them so you know which Pin Code you have entered where.
Real engines don't need forced induction
Who needs a turbo when you have a stupidly quick naturally aspirated engine?
WRONG.
reset donor ECU with its own PIN then carry out immo function ECU change with original PIN
this will keep the PIN that belongs with the car correct.
this ECU have not pin stored in it, it is immo 1!
The new ME1.5.5 works with immo2 and pin stored!
You must use Tech2 and GlobalTis to be able to sync 'new' ECU to 'old' immo box, tech2 can not synchronize immobilizer without permission from globaltis...
My procedure is for Corsa C 2001, immo 2.Work perfect with OP COM 2010.Don't need sophisticated tools,just a cheap OPCOM clone and knowledge.But you need security code(pin code) for both ECU.I paid 25 Euros to an Opel dealer for pin code from scrap yard ECU,40 Euro for OPCOM ,67 Euro for engine ECU,and 18 Euro for 2 transponder chip IP40.Total 150 EURO.I don't
talk nonsense,is exactly what I did 10 days ago to the wife's car.
as I sad M1.5.5 works with immo1 not like newer ME1.5.5 and immo2 ...
conan981 (3rd May, 2019)
it with your tool can perform the reset without needing the pin code
Hello Folks,
i have a question ! i have a opel zafira a with me1.5.5 year 2002 !! can i make this ecu virgin with opcom over obd ??
i want programm this ecu to other car ! but first i must make virgin this ecu !
thanks for answer !
Dobermann (17th January, 2014)
Hello thanks for answer ! but i have now little problem ! in this op com immo informations is explained that always is needed the security code to work with the immo. for ecu resett too !
but what im doing if i have not the security code ?
is it possible make the engine ecu virgin without the code or not ?
br
alclot (25th January, 2019), br.balazs (17th June, 2017), rumensivanov (26th June, 2017)
Hello Folks i have now all keys !! but i have a little problem maybe someone know something about it !!
I have one complete new ecu me1.5.5 for my zafira !! i tryed to programm my new ecu to the immo !!
like in pic.
that woks ok !! shows programmed succesfully but when i go to engine ecu it popup a window witch shows me the ecu is not fully programmed to immo.
its missing a sps programming ! opcom shows message it cant be done with the opcom and i should have a look in the info pdf, but i cant finde anything about this sps programming.
is there a other programm routine with an complete new ecu ??
i hope someone can help me to solve it !!
thanks br dobermann
> here are some user manuals for opcom !
noone knows something about that sps programming missing ?? i will post a pic tomorrow that shows the error
Last edited by Dobermann; 6th February, 2014 at 06:28 PM.
Bookmarks