follow this might help
DreamUP_Patched_dm800_clon.zip follow pdf file in zip.
Or try these have not used below but sure you can figure them out.
DreamBox-OptiFlasher-Pro-E2-v2.0.0.5.rar
NCF.rar
follow this might help
DreamUP_Patched_dm800_clon.zip follow pdf file in zip.
Or try these have not used below but sure you can figure them out.
DreamBox-OptiFlasher-Pro-E2-v2.0.0.5.rar
NCF.rar
Last edited by WOODWARD395; 2nd January, 2015 at 07:37 PM.
Education is not the learning of facts, But the training of the mind to think
So hit the thanks button if I have enlightened you.
jepe (16th December, 2015)
Hi
Having same problem re: ca not found when I tried the above I can't get DCC,dream up or edit to connect to my box ( checked IP addresses etc) direct connect Ethernet and tried router connection. No luck any body any ideas
yes mate . the message i get is "no services or lamedb file" off dreambox edit if this makes any sense to you. dream up says "invalid error". dcc says " error 10057 send socket not connected ".
can anybody send me a link to an image with all the "necessaries" so that if at some point i get the connection i can send it over. please excuse the ignorance of a technophobe newbie all your patience is greatly appreciated
sorry forgot to add box is dm800 hd pvr sim 201 cable tuner
thanks
forget dreambox edit the only program that will fix the problem is dream up patched
the second fix should work for you as long as you have your null modem cable connected correctly.
No ca found by 2nd stage loader This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons. Now for the first sollution.
1) Connect working dreambox DM600/DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open gsmsweden.com
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chosen firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
Last edited by WOODWARD395; 26th December, 2014 at 08:34 PM.
Education is not the learning of facts, But the training of the mind to think
So hit the thanks button if I have enlightened you.
Hi wooward sorry for the delay had a couple of days off a friend managed to do it for me and dropped it off he said he used a sim 2.0 programme? you may know what this is and my cable might have been faulty thanks for the advice cheers
glad you got it sorted never used that program must have a google for more info.
Education is not the learning of facts, But the training of the mind to think
So hit the thanks button if I have enlightened you.
Thanks Woodward.
I just used your Method to retrieve and bricked DM800HD PVR Clone
Worked perfectly first time
I used Method 2, as my box was dead.
Bookmarks