Your cleared file, clear errors, switch ignition off for 10 sec, switch ignition on, clear errors again and done ...
Have a 2015 Rogue 98820-4BA0A read with Xprog box.
Need help clearing crash.
Xprog box has only 2 options when reading, 64k and 256k.
CarProg usually only reads 64k, so I assume that's where the crash is stored.
Attached files are 64k, 256k, and 320k(manually combined).
Thanks in advance !
Your cleared file, clear errors, switch ignition off for 10 sec, switch ignition on, clear errors again and done ...
Last edited by dragon100; 12th September, 2017 at 07:24 AM.
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
repairmymodule (23rd September, 2017), Workshop2 (9th November, 2017)
Help clear crash or need to determine if the module is bad. Too many faults, nothing gets cleared. Tried different eeprom file from allegedly good module and mine is giving me faults for configuration missing and CPU internal failure.
This is my orig dump
Thanks!
Yes I will help everybody , like member on the top, look on the top, no report, no thanks, no help, enough ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
Bookmarks