Hey guys,
It took me ages to source a SX125 waste counter reset program that works, so I thought I would pop it on here.
I've uploaded it into the download section, but thought I may as well pop it on here with a bit of guide too.
I've only tested it on XP 32bit, with a UK SX125 printer, so that's what the instructions will be tailored for. By all means try it on other OS's and feel free to post results.
Reset instructions for SX125:
- Install printer if not already installed.
- Download and extract attached file into a folder on your hard drive.
- Run 'AdjProg.exe' and click 'Accept' on the splash screen then click on 'Select' at the top.
- From the pull down boxes, select 'Epson Stylus TX121' for 'Model Name' and 'ESP' for 'Destination', click 'OK'.
- Click 'Particular adjustment mode' then from the '---- Maintenance ----' section, select 'Waste ink pad counter' then click 'OK'.
- Click 'Check' on the bottom right, this will query the printer and give information of ink shots and so on.
- Tick the two boxes on the left, 'Main Pad Counter' and 'FL Box Counter', then click 'Initialize'.
- It should come up with a message abut restarting your printer, do it!
Job done, carry on printing!
I recommend getting a waste ink tank for your printer, have a Google for one, the waste ink pipe is easily accessible from a clip in hatch on the back of the printer.
Hope that helps, if it's useful, don't forget to thank
J.
-------------------------------------------------------------------------------------------
right, rubbish is still being posted to gain access to this file even after a warning, i will say this one more time, DONT KEEP POSTING RUBBISH TO GAIN ACCESS TO THIS FILE, keep your posts to questions or an answer to another post, THE NEXT PERSON WHO POSTS.....THANKS OR GOOD POST OR JUST WHAT I NEEDED OR ANY OTHER RUBBISH TO GAIN ACCESS TO THIS FILE WILL BE BANNED, YOU HAVE BEEN WARNED !!! DK STAFF
YOUR FIRST POST GOES HERE-----> http://www.digital-kaos.co.uk/forums/f2/
-------------------------------------------------------------------------------------------
Results 1 to 15 of 279
Threaded View
-
13th April, 2012, 04:45 PM #1Top Poster
- Join Date
- Jul 2010
- Location
- UK
- Posts
- 133
- Thanks
- 46
- Thanks
- 206
- Thanked in
- 70 Posts
Epson SX125 waste ink counter reset
Last edited by gmb45; 5th February, 2013 at 06:45 PM.
-
The Following 61 Users Say Thank You to johnnybeast For This Useful Post:
atelzut (9th October, 2014), balibee (20th May, 2013), bertione (29th January, 2014), boaaar (24th October, 2013), c2804021 (15th December, 2013), coldblue (28th May, 2013), dpodor12 (19th November, 2013), ebalkiss (12th November, 2014), eddyvankenoby (22nd January, 2014), FalconMigz (2nd September, 2014), ferrasur (6th January, 2015), fiat 0000 (25th October, 2013), fischman (2nd June, 2013), hamito (29th July, 2013), haveitdave (2nd July, 2014), hrv (7th July, 2013), isiemelink (18th September, 2013), ivanpricic (19th April, 2013), josej69 (3rd May, 2020), korgao (20th April, 2014), lambrosg22 (18th November, 2013), Leitxo (29th October, 2013), magestery (21st October, 2013), Malcolm974 (13th May, 2013), Manhunt (24th June, 2014), mark2024 (25th February, 2024), marsarts (21st October, 2015), masterren44 (3rd April, 2014), metak (21st December, 2016), murch (8th April, 2014), musta22 (23rd April, 2022), northernheart (22nd October, 2013), PCMEDIC (30th September, 2014), pippo3210 (7th February, 2024), protor (15th January, 2015), ps2k (24th November, 2015), ptolemaeus (28th March, 2013), sbixx (7th April, 2013), shevor (8th March, 2019), shuffleinc (12th August, 2013), sidwho (15th May, 2013), sumpy (7th July, 2014), telecomonde (19th June, 2013), thessgr (26th June, 2013), tony18101963 (25th May, 2013), tr0r (30th June, 2014), xxhd (28th June, 2014), yiwen akeni (17th December, 2013)
Reply With Quote
Bookmarks