dt200 (22nd April, 2018), gnikolovienis (25th November, 2018), ionutraduta (8th November, 2017), p1gl3t (18th April, 2017)
hi,
received a 59f ecu from Fiat Punto 2001 1,2 8V.
The problem it was no spark from second coil pack.
so,,,after much reading, i open ecu (four plastic solders)
with a 4mm drill and 8-10 mm depth.
With hot air gun unstuck the plastic cover.
Do not remove the screws that can damage ecu 99%.
The problem was evident for the first conclusion.
Silver wires (from ecu to external pins) was cut.
This because one from coils was damage and reduction the
resistance with effective require many ampere from pin 10.
So the result is one seared wire line.
with VERY attention i solder copper wires (to replace the old)
i make two crooked together for necessary amperes for coils.
now (with TWO NEW coils) car run well without prob.
oh,my experience with ecu i found another one cut wire.
it's from A/C.
replacement to with a new one.
all work fine now
p.s.sorry for bad fotos but iphones ... very poor cam.
can inform me what hw version is that ecu ? all numbers is extinct from ecu.
best regards
Last edited by pandokrator; 3rd January, 2013 at 12:07 AM.
dt200 (22nd April, 2018), gnikolovienis (25th November, 2018), ionutraduta (8th November, 2017), p1gl3t (18th April, 2017)
Nice job next time post better photos
IF YOU THINK IT'S EXPENCIVE TO HIRE A PROFESSIONAL,WAIT UNTIL YOU HIRE AN AMATEUR
Barajasz207 (10th November, 2020)
are you right m8,
goddamn iphone..
you know what hardware version is this iaw?
(>100 or <100)
bR
try thes god foto
http://www.digital-kaos.co.uk/forums...aw-59f-247493/
You can find these repair manual for 59f on DK anyway here it is for these post on english
IF YOU THINK IT'S EXPENCIVE TO HIRE A PROFESSIONAL,WAIT UNTIL YOU HIRE AN AMATEUR
amaflo (2nd May, 2018), anour10 (12th December, 2018), armpower (4th February, 2018), asliyucegsm (29th April, 2017), Barajasz207 (10th November, 2020), Bonito46 (14th September, 2013), BusCan (12th July, 2021), dt200 (22nd April, 2018), ecufix (15th October, 2019), giani03 (12th March, 2014), illestibor (16th June, 2020), kronk92 (5th January, 2017), Lucky Luke (16th January, 2019), mustafa06 (21st February, 2018), nick_f (15th September, 2016), oyalloy (4th September, 2018), p1gl3t (18th April, 2017), pbn (16th November, 2016), sasa5 (7th September, 2013), sonho1999 (17th September, 2016), Twist (14th March, 2018), ziomski (10th January, 2018)
with clear fotos
Thanks for this helpfully file
How to open IAW59 P4 he's stuffed connector ?
Last edited by pajper; 22nd April, 2018 at 08:40 AM. Reason: error
is the same case friend ,
dvdpgn (7th July, 2018), Stelaras26 (4th May, 2018)
Thanks for the instructions I have no experience but one violently opened P4 connector is glued to plastic?
The P4 is surely glued here to find out how to open this model?1111111111.jpg
thanks nice
Thanks a lot for sharing your knowlege.
Bookmarks