lidons (28th May, 2017)
VVDI2 did not give me a option to remove CS on this Cluster. There is option for A8 Cluster which I tried, read car was ok, read Cluster nothing, I even tried to connect to direct cam lines under driver seat same result.
I believe A4 is easier Cluster to remove CS maybe.
Anyone remove CS from 2014 Audi A6 Cluster?
I also have full vcds auto scans saved all info, don't see vvdi2 option to remove CS only to change mileage which I tested on work good.
lidons (28th May, 2017)
Samic do you have any suggestions?
Have a customer with 2013 VW GTI (USA), does anyone have an experience with this model? is it the as Jetta and Passat of the same year as far as cluster type and dealer key make process?
Thanks in advance
Last edited by gilahish; 28th May, 2017 at 09:27 PM.
I tried that option,
for some reason in generation 2 mode it thinks Instrument cluster does not have cp.
it finds other things like the seats etc and can adapt it seems.
cluster is what is giving me issue.
reason I am changing it is because swapping night vision radar to car, s? Cluster must be swapped...to work with it.
i looked at 95320 files from old cluster and new they seem to be very similar.
trying to see if Samic has any advice or input.
car is 2014 so maybe borderline has been adapted before or vvdi knows something about it, maybe different procedure is needed to bypass cp
Hi, everybody
question
there was a correction ....support golf 7 ? -2013
where isn't present eeprom 5G0920861A
but only nec processor
Has anyone generated a Xhorse remote for A6L? Is there an option in VVDI2 for it? Don't understand chinese...
Could it be the same option as A3 220D 433MHz????
Last edited by sniegavirs; 30th May, 2017 at 09:32 AM.
Has anyone been able to read and reset Toyota and Lexus H smart keys? 128bit, newest smart keys?
I could not reset the smart 128 bit
antotechaustin (3rd June, 2017)
have done a few audi a5,s but have been asked to do a 151 is it safe or has anyone done it
Have a problem with VVDI2. It cannot connect to car. Connects to laptop fine. Transponder section works ok. But when I tried to connect it to 4 different VW cars, but won't connect through key learn, dash or diagnostics. I'm on the latest software and firmware, It is only like this since I updated it. I tiried updating firmware again but it is still the same.Tried different OBD cable also. Did anyone have this problem?Thx.
Was working fine until now. Have vvdi a long time. Had fault where it wouldn't connect to the laptop before but never had this fault before.
dustin2014 (2nd June, 2017)
Use REVO Uninstaller, its free...
Completely Un-Install VVDI and everything it finds related to VVDI.
Reboot, install fresh...keep us updated.
dustin2014 (2nd June, 2017)
Bookmarks