cas3+ its crypto have long isn not short
all key lost situation need isn long from ecu
you have problem with that now
Hi Dear
I have BMW 2009 CAS3+ the battery was dead and the keys lost, I made key with VVDI2 and the key working very good, but the car not start becuse of need sync better the DME and CAS , I try with VVDI2 but give me "Synchronization NOT Possible" the CAS and DME the original one for the car.
I am try to read the CAS Code-DEM gives me (1A6D) I don't know what is that?
Could you please tell me how can I do the sync
cas3+ its crypto have long isn not short
all key lost situation need isn long from ecu
you have problem with that now
Last edited by doctore; 18th October, 2017 at 08:28 PM.
Professional bmw key service cas 3/3+ 4/4+ repair = reset ews egs 8hp = 6hp-egs19d
must have isn from ecu or dump
follow the instructions when making the key, carefully read not hurrying a lot
Last edited by doctore; 18th October, 2017 at 06:27 PM.
Professional bmw key service cas 3/3+ 4/4+ repair = reset ews egs 8hp = 6hp-egs19d
Post cas dump i thinki can help you with long isn
I had e92 sync by obd not possible on ecus after 2006 or 7. Msd80 85 ecu is petrol. It must be mached not by obd
made key bad. u have to read isn from engine ecu and make key with vvdi2 using isn from dde\dme
I got the ISN from dump I post before
So I add it by tango but I didn't add the Key yet is it right way to make key
you have isn long 32 numbers
you cannot doo nothing with 1A6D its short
Last edited by doctore; 18th October, 2017 at 09:05 PM.
Professional bmw key service cas 3/3+ 4/4+ repair = reset ews egs 8hp = 6hp-egs19d
must have isn from ecu or post dump someone will give you
no other way
here is support for your tools
http://www.digital-kaos.co.uk/forums...rrived/page198
Last edited by doctore; 19th October, 2017 at 09:53 AM.
Professional bmw key service cas 3/3+ 4/4+ repair = reset ews egs 8hp = 6hp-egs19d
Bookmarks