Hi guys


I would like to be able to clone ECU's and be able to immo some as well.
The clone side of things seems pretty straight forward as it seems you just need to read the EEPROM of the old ecu and write it over the EEPROM of the replacement ECU.
And there seems to be a few software packages on ebay that can remove the IMMO off the file read from the EEPROM.


Is this all correct? ....


Now my question is.....


Can anyone recommend a cheap programmer that can read/write to a majority of ECU's?

It would need to be USB and work under at least windows 7.


I don't want to spend too much as its not something i would be using often (probably use it more for bios chips in computers).