help immo iveco 3.0 2016

[kawaracing]

I'm trying to make immobilizer of iveco daily 3.0 bosch unit edc17cp52 0 281 030 092 .I have done a test and it does not work, someone can help or see if my files are well done thanks

sorry for english

have an original file and modified by me

[greyg]

This method does not work in new SW.

[okura]

you can use emulator for immo off, or program new key

[kawaracing]

there would be some way to virginize to be able to adapt a new pin to the motor control unit
there would be some way to virginize to be able to adapt a new pin to the motor control unit

[greyg]

Lost key or original edc?

[kawaracing]

Lost key and bcm

I have got a bcm of scrapping and I need to adapt it so I need to virginize the engine unit

[greyg]

I do not publish this solution. I can suggest that it requires modification of eeprom and flash. Before that check bcm: abs or esp, a / c etc.

[kawaracing]

the problem is that they stole BCM and keys, I bought a scrap BCM and I need to adapt bcm to motor unit there is some option.
I have motor unit readings through KTAG and bcm eeprom
I have the possibility to create keys but I need to adapt bcm to the motor unit

unit motor :
bosch 0 281 030 092 sw P_591 9.6.3 infineon tricore

BCM:
RX2BCML7 BCNS20I.04 EEPROM 95640

sorry for english

[kawaracing]

someone has some idea thanks

[avital]

For IVECO ecus, I do mount emulator, not need none changed in ecu dump only write to emu eeprom 24c02 6 bytes of synchro





Wysłane z iPhone za pomocą Tapatalk

[naprawa5]

Spróbuj go wyłączyć.
Spróbuj wyłączyć to w eepromie.

[kawaracing]

ok i inform in while thanks you very much

[kawaracing]

no works,i will try whit emulator ,or look for some unspoiled solution if i find something notice

[kawaracing]

where can i look fo emulator thanks

[avital]

I send info to PM.