very good information, it still does not work.
very good information, it still does not work.
Has anyone honestly been able to
perform a lasting VP44 transistor
repair? Looks like some tricky soldering, lots of uncertainty as to what type transistor to use, questions as to what type transistor Bosch used originally and wether calibration is required after? Best way to secure for required heat sink? I’m in Canada,
new to the forum with a Dodge truck and melted transistor wire to
fuel valve drive transistor. Read tons, watched all the videos but seems nobody getting lasting repair and then discusssion ends??? I understand these pumps are much more common in Europe. Sure be great to hear a good success story from someone not trying to sell something.
Cheers, Gary
Transistor in the way. Guess I’ll do my best as an Electronic Technologist with lots of soldering experience. I hope to post some good news.
Sorry, meant to say transistor “on”
way.
Hola a todos mi focus tddi 1999 funciona pero no acelera bien hasta estar en temperatura. Quiero decir lo arrancó y arranca bien pero demora unos cuantos minutos en responder al pedal. El error a tiro spc fue p1564. Gracias a todos. Un saludo
Ditworks2 i use dpack irlr2905 mosfet (i newer buy in China), but trick is in soldering!
Hello everyone.
Change the mosfet to two psg5 of Focus and one of astra, I am testing with a pump in the test bench, with the three modules I only have a wide signal in the valve a couple of times. The other pulses are very narrow and do not actuate the valve.
Will it be for not trying on the vehicle? I take a few captures, one with a wide pulse when the valve is activated and the other with the narrow pulses that do not activate it. Greetings and thanks.
best fet for pump is irlr3110.if you check signal of valve on bench for ford you must unlock electronic ,code is in electronic
Thanks for your help.
He has the 3110
I will try to delete the code. Although I do not think it explains why sometimes it shoots and sometimes it does not, as the images show. Then I comment the results.
I put in the car, immediately p1554 and p1664. I can not erase.
Check +12v on the pump module connector
Checked 12v, ground and can.
Module psg5 with kts570 does not present errors.
Thanks for your help.
check preinjection fet,and capacitor for pump rpm
and check 5v stabilisator
Bigfordushka (19th November, 2018), SERBAN 70 (25th June, 2023)
Bookmarks