Did you see that function on vvdiprog @electrones
Did you see that function on vvdiprog @electrones
Hi, i hope someone can help me,
I hava a IAW4 ecu with 95320 EEPROM.
I modified data for immo off, but keeps overwriting the eeprom. so i need to protect it.
I found this on HM-Autos
Now i know that miniPro has the option to do it, so i did.To activate whole memory protection by programming 'Status Register' to 8C (possibily be xC)
some programmer supports 'Status Register' programming such as UPA (Xprog not!)
Didn't work..
Now i read the EEPROM status with VVDI Prog, and it sas '80'.
What do i need to put in to realy protect? Can i do the 8C like in the quote? Or is '80' right?
Yes i know, a litle bit confusing message..
hello guys,
please need help read Jagaur RFA
vvdi is able to read id but cannot read file
pictures below
thanks
You have to read it as secured and follow there other wiring diagram. You have to remove two resistors.
habbyb (24th August, 2018), mickye_dj (26th August, 2018), philipcoin (18th August, 2018), sqlkarol (25th August, 2018)
my vvdiprog was not able to read but i used a friends own and read successful
i dont know if my vvdiprog is hardware or cable issues
Ok mate thanks
BMW EWS3D connection with VVDIprog. 3D is different from regular EWS3
Ews3D can be found in bmw Z3 and some older Land Rovers.
Last edited by nickolasd; 23rd August, 2018 at 05:01 AM.
autocar88 (26th August, 2018), datapage (25th August, 2018), Diablotic (24th August, 2018), habbyb (24th August, 2018), jodge (23rd August, 2018), Levanime (24th August, 2018), Locksmith Hungary (23rd August, 2018), Nymike (24th August, 2018), PocketHero (24th August, 2018), rob h (23rd August, 2018), sniegavirs (24th August, 2018), sqlkarol (23rd August, 2018)
Can I renew pcf7945 in a mini cooper key with vvdiprog?
Does it work?
hello , i was waiting and waiting for mc68hc05x32 adapter today it arrived but still cant read 0g47v from ml mercedes , it stuck on 0% than says read error any clue for this ?
tried with xprog and upa , nothing happens also so i ordered this adapter with hope since its on list but hopless
version i am using is 4.7.1 also tried 4.7.0 any idea mates ???
look here very nice video https://www.youtube.com/watch?v=EnrmHjC6eHE
Hi guys,
Having problems reading KVM mcu MC9S12XEG348 this message pop up when trying to read
Partition information error,please select the partition size manually.
Have read few solution on blog.xhorsevvdi.Com
But no solution yet
please help
Thanks
Bookmarks